Breakaway Kit Not Working Properly and Causing Issues with my Brake Controller
Updated 11/25/2020 | Published 11/24/2020
Question:
I hope you can help me with a brake question. I am just wondering if the emergency brake would have an effect on the whole trailer as I get intermittent brake failure connections on my truck. When I pull the pin the brakes do not connect and I have to reset the trailer to get my brake control back to functioning. The brakes hum when I put my brake on but when I pull the pin on the emergency cable nothing happens but it does affect the rest of the breaking ability until I reset it again. I have one that is just a small box on the side of the trailer directly wired. Thanks 2016 Northwoods Nash 25c
asked by: Nancy M
Expert Reply:
If I understand correctly when you hit the brakes in your truck the trailer brakes work fine. Then if you pull the pin on the breakaway switch the trailer brakes do not work and will not work again even using the truck until you put the pin back in the breakaway switch.
If this is the case there is a wiring problem with your breakaway kit the main trailer brake wire should run directly to the brakes and the breakaway kit should only be spliced into that. It sounds as though the trailer brake wire was in some way wired too far into the breakaway kit and it is affecting its performance.
It also sounds as though the battery on the breakaway kit is dead and needs recharged or replaced. This could also be caused by the wiring not being correct.
I have linked instructions and an installation video you can use to verify if your wiring has been properly installed. This is on the Curt Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger part # C52042 but they are all similar.
Product Page this Question was Asked From
Curt Trailer Breakaway Kit with Trickle Charger, LED Tester, and 5 Ah Lead Acid Battery - Side Load
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-Axle
- Tandem-Axle
- Triple-Axle
- LED Indicator
- Electric
- Battery Included
- 5 Ah
- 51 Inch Long
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers - Zinc Plated Steel
- Shop: Curt Trailer Breakaway Kit with Trickle Charger, LED Tester, and 5 Ah Lead Acid Battery - Side Load
- Video: Feature Review Side-Door Bar Lock Assembly
- Shop: Brake Controller
- Search Results: 440l peterson square trailer tail light
- Search Results: trailer light guard
- Shop: Tamper-Proof Door Latch w/ 45" Pipe for Enclosed Trailers - Zinc Plated Steel
- Search Results: wire connectors wiring
- Search Results: accessories and parts
- Search Results: electric brake magnets
- Search Results: trailer wiring accessories and parts
- Search Results: 7 way plug
- Shop: Trailer Wiring
- Shop: Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Zinc Plated Steel
- Video: Curt Push-To-Test Trailer Breakaway Kit Installation - 2017 Grand Design Solitude Fifth Wheel
- Video: Review of CURT Trailer Breakaway Kit - Kit with Push Test Charger - C52042
- Shop: Autowbrake Electric Brake Controller - Trailer Mount w/ Remote Fob - Up to 3 Axles - Proportional
- Shop: TowSmart Trailer Connector Adapter - 4-Way Flat to 7-Way
- Q&A: Can Trailer Breakaway Kit Be Installed Into Junction Box for Cleaner Connections
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Specialty Recreation Inner Garnish for RV Skylight - 22" x 22" - Clear
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Recommended D-Ring Tie-Down Anchor For With An Endless Loop
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: etrailer Electric Trailer Brakes Review
- Video: In-Depth Review of the Light Guard
on Trailer Breakaway Kit
