Availability of Replacement Latch for Old Sears X Cargo Box

Question

Question:

I have Sears Xcargo carrier purchased around 1982 time frame Model 7249 looking to replace 2 broken snap latches part number: 455. The problem i cannot locate replacement latches. Do you have any recommendations what i could use as a replacement.

asked by: Larry D

0

Expert Reply:

Thule tells me that the latch you referenced is an acceptable replacement for newer models of the X Cargo. We have other customers who have used the # 03347 latch as a replacement on their X Cargo boxes (see photo), and it has worked just fine.

Since your box is a little older, and appears to have used the metal latches, you might need to relocate the mounting holes for the latch, but other than that, the latch should work perfectly for you.

expert reply by: Mike L

0

click to enlarge

Answer 1

To replace the mounting hardware on your Sears X-Cargo Sport 20 cargo carrier you can use the Replacement Hardware Kit #TH05603 to re-mount your cargo carrier on most factory and aftermarket roof rack crossbars. To replace the lock, you'll want…

view full answer...

Answer 2

We do have replacement latches for the Sears X-Cargo boxes with the part #03347.

view full answer...

Answer 3

The Replacement Latch for SportRack Explorer Cargo Box part #03347 will work as a replacement latch for your Sears X-Cargo Box. The appearances between the older style of latch will differ slightly from this replacement, however, it is a confirmed…

view full answer...

Answer 4

The top portion of your latch should be on the outside of your shell and not the inside. It looks like the parts were likely dismantled for cleaning or painting and were reinstalled incorrectly. We do offer some great BOLT Covered Padlocks like the…

view full answer...

Answer 5

It's a newer style of latch, but Thule has said that their replacement latch part #03347 that you referenced has been confirmed to work on the older Sears X Cargo Carriers like what you have.

view full answer...

Answer 6

We have other customers who have used the #03347 latch as a replacement on their X Cargo boxes (see photo), and it has worked just fine. Since your box is a little older, and appears to have used the metal latches, you might need to relocate the…

view full answer...

Answer 7

The Replacement Hardware Kit for Searsbox Cargo Box #TH05603 is most likely not what you need. Without knowing exactly what version of box, it is difficult to confirm a fit, but it is more likely the Replacement Mounting Hardware for X-Cargo Sport 20…

view full answer...

Answer 8

The best option we can offer is the Replacement Latch for SportRack Explorer Cargo Box #03347. This is a plastic latch that will work on many of the older sears X cargo boxes. It is not exactly identical to the older style latch in your picture, but…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Availability of Replacement Latch for Old Sears X Cargo Box

Continue Researching