Timbren Suspension Enhancement System for 2012 Chevy Silverado 1500 With 6 Inch Lift

Updated 11/24/2020 | Published 11/21/2020

Products Featured in This Question

Timbren Rear Suspension Enhancement System

(6311)

$269.36

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(140)

$16.57

Timbren 1/2" Spacer for Raised Frame Vehicles

(59)

$11.71

Question:

Good evening I’m looking a timbren rear susupension kit. Wondering if it will work with a 6 inch lift kit on my 2012 Chevy Silverado 1500 Crew cab 4x4. Model TGMRCK15S. I believe I need 1” spacers as well model A25723-90AH00. I’m just wondering if this is all I will need to purchase from you or do you sell a longer bolt to go through all of them. I believe I will need 5 1” spacers on each side as well as the rear suspension enhancer system. I tow a slightly heavy trailer that makes my truck sag a little in the rear. Hoping this will fix it Please let me know. Thank you.

asked by: Jaden

Expert Reply:

Like you mentioned, you will need spacers, but your 2012 Chevy Silverado 1500 with a 6 inch lift is compatible with the Timbren Rear Suspension Enhancement System # TGMRCK15S.

Since there should be between 1/2" and 1-1/2" of space between the bottom of the Timbren spring and contact point, five on each side of the Timbren 1" Spacer For Raised Frame Vehicles # A25723-90AH00.

If you install them and there is a bit of a larger gap, you can always add another spacer, either the 1" or the 1/2" Spacer # TA25722-90P00. In regards to the bolt, you will need a longer one but that would need to be sourced locally.

expert reply by: Kyle S