Axle Lift Kit for AL-KO QF35 Flex Axle Single Axle Trailer

Question

Question:

I have a QF35 flex axle 3500lb that I want to lift 3 inch but it has a 9 inch wide gap between the center holes. I found the teraflex lift kit - tandem axle 3 1/8 lift but mine is a single axle. What do I need?

asked by: Nicole

0

Expert Reply:

The Lippert Axle Riser Kit # LC270682 is designed for single, torsion axle trailer like yours. This kit offers 3-1/2 inches of lift for the trailer and has bolt hole spacing that is 9 inches apart.

We do not have a kit that offers a rise closer to the 3 inches that you mentioned.

expert reply by: Victoria B

0

Answer 1

Can you get me the brand of axle you have? I believe you might have an AL KO axle which we won't be able to help you with but if you have a Dexter or Lippert torsion style axle we can get you a lift for it.

view full answer...

Answer 2

Hey Dan, Appreciate the photo and you'll need to take a measurement as I wouldn't be able to tell you offhand if your trailer has the clearance for the Loadstar ST235/75R15 Radial Off-Road Tire w/ 15" Black Spoke Wheel #KE78JR. The…

view full answer...

Answer 3

I attached a picture that shows the dimensions of the Dexter lift kits #K71-723-01.

view full answer...

Answer 4

My contact at Dexter confirmed that the Torflex Lift Kit #K71-723-01 will work for your 1,500 lb #9 Torflex axle. That being said, based on your serial number 122265412, I was able to confirm you have a top mounted axle. So in order to install the…

view full answer...

Answer 5

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 6

The Torflex Lift Kit #K71-707-01 is our only lift kit we have for your 2014 Rockwood Mini Lite 1906 with a #10 Dexter Torflex axle. This kit is only available with a 2-5/8" lift for your axle. You could consider switching to the larger…

view full answer...

Answer 7

Hey Mel, thanks for reaching out! There aren't any lift kits for your AL-KO axle, but I do have a way for you to gain some clearance if you're willing to swap out your axle to the Timbren Axle-Less Trailer Suspension #ASR3500S06. This…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Axle Lift Kit for AL-KO QF35 Flex Axle Single Axle Trailer

Continue Researching