How to Raise a 2014 Rockwood Mini Lite 1906 With Torflex #10 Axle At Least 3"

Question

Question:

Hi, I have a 2014 rockwood mini lite 1906 trailer with 3500 lb Dexter torsion axle. I would like to lift it at least 3”. What kit do I need for this? Thanks

asked by: Dustin T

0

Expert Reply:

The Torflex Lift Kit # K71-707-01 is our only lift kit we have for your 2014 Rockwood Mini Lite 1906 with a #10 Dexter Torflex axle. This kit is only available with a 2-5/8" lift for your axle. You could consider switching to the larger ST235/75R15 Radial Off-Road Tire w/ 15" Black Spoke Wheel # KE78JR which is 2.7" taller so it would raise your trailer by another 1.35".

expert reply by: Bud M

0

Answer 1

Can you get me the brand of axle you have? I believe you might have an AL KO axle which we won't be able to help you with but if you have a Dexter or Lippert torsion style axle we can get you a lift for it.

view full answer...

Answer 2

Hey Dan, Appreciate the photo and you'll need to take a measurement as I wouldn't be able to tell you offhand if your trailer has the clearance for the Loadstar ST235/75R15 Radial Off-Road Tire w/ 15" Black Spoke Wheel #KE78JR. The…

view full answer...

Answer 3

The Lippert Axle Riser Kit #LC270682 is designed for single, torsion axle trailer like yours. This kit offers 3-1/2 inches of lift for the trailer and has bolt hole spacing that is 9 inches apart. We do not have a kit that offers a rise closer to the…

view full answer...

Answer 4

The lift kits we carry fit with specific axles; the #K71-725-02 is a tandem axle application and will give a 3-1/8" lift and is compatible with side-mounted #12 Torflex axles with 5,500-7,000-lb capacities. If that is what your axle is, this kit…

view full answer...

Answer 5

My contact at Dexter confirmed that the Torflex Lift Kit #K71-723-01 will work for your 1,500 lb #9 Torflex axle. That being said, based on your serial number 122265412, I was able to confirm you have a top mounted axle. So in order to install the…

view full answer...

Answer 6

Hey Mel, thanks for reaching out! There aren't any lift kits for your AL-KO axle, but I do have a way for you to gain some clearance if you're willing to swap out your axle to the Timbren Axle-Less Trailer Suspension #ASR3500S06. This…

view full answer...

Answer 7

I attached a picture that shows the dimensions of the Dexter lift kits #K71-723-01.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

How to Raise a 2014 Rockwood Mini Lite 1906 With Torflex #10 Axle At Least 3"

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching