Correct Replacement 25-1/8 Long Leaf Spring for 3,500 Lb Axle

Question

Question:

I have a lippert axle with GAWR of 3500, I jacked the RV up and got 25 1/8 dimension with my current 4 leaf spring. I want to replace them since it hasnt been replaced since 2014. Can you please help me?

asked by: Keicey P

0

Expert Reply:

Yes, we have just what you need in the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles part # e54SR which will be an exact fit replacement.

expert reply by: Conner L

0

Answer 1

Hey Ed, welcome back! As long as the Big Truck Big RV Tongue Weight Scale #BTBRV004 is on a hard flat surface that does not flex it will work just fine. So you can use a spacer of some type to take up the extra space needed with this and it will work…

view full answer...

Answer 2

I would be happy to help you find the correct replacement leaf spring the Dexter 3500lb axles on your 2018 Grand Design Imagine travel Trailer, but I will need to know the length of your current springs measured from the center of the spring eye to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Correct Replacement 25-1/8 Long Leaf Spring for 3,500 Lb Axle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching