Dexter Axle Trailer Brakes BP01-110 Review Video

You will use only one spring in the Dexter Replacement Trailer Brake Magnet Kit for Dexter and Hayes / AL-KO 10" Trailer Brakes, #BP01-110. Which spring will depend on which brake system you have. If you have the Dexter brakes you will use the…

Assuming that when you tested the resistance of the brakes you were testing the two wires on each magnet and getting 2.0 and 2.8 ohms the magnets on your trailer are not working correctly and will need to be replaced. For 7" brakes you should…

You would need a tire with more weight capacity. Basically you need to take the total weight of the trailer when loaded and ready to tow and divide that number by the amount of tires the trailer has and that's the minimum tire weight capacity…

I am not sure which replacement braking assemblies you need for your trailer but this is pretty easy to find out for yourself. The only thing you need to do is crawl under the trailer and try to find the white axle sticker which should display…

I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…

The brake magnet that will work with your ALKO 10 x 2-1/4 inch brake hubs, that I recommend is the #AKBRKR-M10. Included with this brake magnet is the retaining clip and spring. The way the brake magnet works is when power is fed to this magnet…

The differences between the Electric Trailer Brake Kit w/ Dust Shields #AKEBRK-10 and the Dexter Electric Trailer Brake Assembly #23-450 are the different manufacturers and that the #AKEBRK-10 have dust shields, and the #23-450 does not. Also #23-450…

Because the face of the magnet rides against the armature (inside) surface of the brake drum, any grooves that had previously been worn into the armature surface will cause the magnet to wear unevenly. For optimal braking performance, you want…

Basically every company who makes trailer brakes has their own brake magnets. Dexter is one of the leading manufacturers which is probably why you have found a lot of their stuff. Attached is a link to our selection of brake magnets for you to filter…

Electric Trailer Brake Kit #AKEBRK-35-SA comes with both the right and left brake assemblies but also new nuts and washers. If you get the brakes individually the nuts and washers are sold separately. If you do not need the nuts and washers then…

The part of a hub/drum assembly that makes contact with the electromagnet, the armature surface, cannot be machined. If the surface is deteriorated you'd do well to replace that hub. The link provided will show you all hub/drum assemblies which…

The backing plate is not available separately from the entire assembly for this part number. When the backing plate needs replacing, the other components need replaced as well. The B10EA-21 AxleTek 10" x 2 1/4" LH Self-Adjusting Electric…