Products Featured in this Video

Replacement 10" x 2-1/4" Electric Brake Shoes - 1 Brake Assembly

64 reviews

Code: BP04-095

Retail: $74.86

Price:  $55.73

• Accessories and Parts
• Trailer Brakes
• Electric Drum Brakes
• LH
• RH

• Brake Shoes
• 10 x 2-1/4 Inch
• Redline

Replaces the brake shoes for your 10" x 2-1/4" manual-adjust, electric brakes. Includes shoes for one brake assembly. Fits Dexter, Fayette, and Foreman electric brakes.

Do you have a question about part BP04-095?more information >     

Review of Redline Accessories and Parts BP04-095

Today we're going to take a look at the 10 inch by 2 and a quarter inch electric brake shoe and lining for 3500 pound axles. This part is for 1 wheel. These trailer brake shoe pads are for electric trailer brakes. They are designed to fit most 3500 pound axles. They will fit the Dexter, the Fayette and the Foreman 10 inch by 2 and a quarter inch electric brakes. It does include the primary shoe, the secondary shoe, and it will include the 2 hold down springs with the pins. The primary shoe is usually the front shoe.

That will usually have the smaller pad on it when compared. You can see the secondary shoe will usually be the larger pad. You have to remember that when these are installed, the smaller, or the primary shoe will be to the front, will point towards the front of the trailer. You want to make sure when you assemble these that the smaller shoe goes in the front and the larger shoe will go on the rear. These parts are certified by US SAE standards and CSA standards, which are the Canadian standards. These are designed to be used with 10 inch drums.

When we do say 10 inch by 2 and a quarter, what we're basically saying is you can determine the size brake assembly you have by measuring it when it's all installed on your trailer. When these are all installed, if you measure the diameter from the pad to this pad, straight across, should measure 10 inches. Then the 2 and a quarter is the actual width of the brake shoe lining itself. So you see there 2 and a quarter. When these are installed, if you have this all installed on your trailer on the brake assembly, with them installed, if you measured across you'd know you need a 10 inch and if you measure the width it'd be 2 and a quarter inch. That should do it for the review of the 10 inch by 2 and a quarter inch electric brake shoe and lining for 3500 pound axles for one wheel.