Can E-Z Flex Equalizer be Removed and Original Equalizer Put Back On

Updated 08/20/2020 | Published 08/18/2020

Products Featured in This Question

Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs

(579)

$350.21

Dexter Bronze Bushings - Qty 4

(672)

$22.63

Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole

(391)

$27.89

Question:

Hi, I purchased the K71-652-00 system for my travel trailer, and although it seem to be correct and working well, I am not happy with the way the trailer sits. Im sure its more me than the product. Anyway I do like the wet bolt system instead of what the travel trailer came with. I would like to know if its possible to remove just the part in between with the rubber piece on it and put back the original part I took off which has 104 stamped on it, with the wet bolts and bronzes bushings. I understand that it will probably make things a little stiffer, but im ok with that. So if this is possible, could you recommend the parts I would need to do the change over. Thanks

asked by: Larry D

Helpful Expert Reply:

It sounds like you want to remove the equalizer portion of the Dexter E-Z Flex Suspension Kit # K71-652-00 and replace it with your old one, which sounds like it is the Equalizer for 1-3/4" Wide Double-Eye Springs # TREQ104.

To do this you will want to replace what I assume are the existing nylon bushings in your equalizer and add two of the Bronze Bushings - Qty. 4 # K71-291-00.

I have added some links to videos for you to check out as well.

expert reply by: Kyle S