Availability of Trailer Suspension Kit AP233 without Equalizers

Question

Question:

Do you have a kit just like this without the equalizers? My Jayco trailer has the spread axles and the equalizers wont fit but really dont need them but all the rest I do.

asked by: William M

0

Expert Reply:

We don't have an exact kit with the components needed but we do have the parts individually like with the part # TRSL225 for the shackles and then for the bolts # 166081 which includes the nuts as well. You'd need 8 bolts and then 14 shackles.

expert reply by: Jameson C

0

Answer 1

It is actually quite common for the front and center hangers to be different sizes on a tandem axle trailer. The idea behind this is that when you factor in the height of the equalizer and shackles, everything will be at a level height. In most cases…

view full answer...

Answer 2

The Dexter E-Z Flex Suspension Kit part #K71-652-00 is indeed correct for a 2021 Nitro Z-19 Bass Boat Trailer. The trailer uses EQ-104 equalizers which measure 5-3/4" long therefore the Dexter E-Z Flex Suspension Kit which has equalizers which…

view full answer...

Answer 3

Yes, it is a good idea to go ahead and add grease when installing the Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links #AP233. You don't want to use fat though, just go ahead and use the LubriMatic…

view full answer...

Answer 4

Best option for a cushioned equalizer kit to replace a equalizer part #TREQ104 would be the EZ Flex part #K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts…

view full answer...

Answer 5

Based on your description of a 5-3/4 inch long equalizer that is very short, it is highly likely you have the Curved Equalizer #TREQ104. This is the same length, and measures 2 inches tall from bottom bolt hole to center bolt hole. The Road Armor are…

view full answer...

Answer 6

For a wet, step-bolt you can use #34007-187-00. It is sold in quantities of 1. For a bronze bushing use #D014-077-00 which is also sold in quantities of 1.

view full answer...

Answer 7

Yes, the E-Z Flex Heavy Duty Rubber Suspension System part #K71-652-00 will be a direct upgrade for the EQ104 Equalizer. The part I really like about the E-Z Flex is that in addition to the cushioned equalizer upgrade which will help smooth out the…

view full answer...

Answer 8

The E-Z Flex Heavy Duty Rubber Suspension System #K71-652-00, that you referenced, comes with brass bushings, but you can replace them with the Nylon Bushing #TRBU11566 for something that's a little better for wear and tear than a brass bushing.…

view full answer...

Answer 9

For 3500 pound axles with 24 inch springs the #e59SR is what you need. Springs stretch as they wear out so it's very normal for your measurement to be longer than the new springs. Also, the Tandem Axle Equalizer Kit #AP233 is also great for you.…

view full answer...

Answer 10

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 11

Most leaf replacement trailer leaf springs are going to come with new bushings so I wouldn't anticipate you having to remove your old ones to install them in new springs. That said the bushings are removable if needed. Since we know your 2018…

view full answer...

Answer 12

Your tandem axle utility trailer will likely have an equalizer like the Curved Equalizer #TREQ104. These would have been held in place by 3" Shackle Bolts #166081 and Nylon Bushings #721590 and Shackle Links #LC122487 on the ends of the…

view full answer...

Availability of Trailer Suspension Kit AP233 without Equalizers

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching