Recommend Bushings Needed For TruRyde Curved Equalizer # TREQ104

Question

Question:

I ordered the equilizer TREQ104. I need to know which bushing is the correct one.

asked by: Tina J

0

Expert Reply:

The item you ordered, TruRyde Curved Equalizer, part # TREQ104 comes with the bushings all ready to go.

For replacement bushings for part # TREQ104, you will need the TruRyde Nylon Bushing, part # TRBU11566.

expert reply by: Reno H

0

Answer 1

First we do have the basic Curved Equalizer #TREQ104 which matches your 5-3/4" length and 2" height. As these are sold individually you will need 2 for your 1998 Fleetwood Terry camper. You might consider upgrading to a cushioned equalizer…

view full answer...

Answer 2

Based on your description of a 5-3/4 inch long equalizer that is very short, it is highly likely you have the Curved Equalizer #TREQ104. This is the same length, and measures 2 inches tall from bottom bolt hole to center bolt hole. The Road Armor are…

view full answer...

Answer 3

It is actually quite common for the front and center hangers to be different sizes on a tandem axle trailer. The idea behind this is that when you factor in the height of the equalizer and shackles, everything will be at a level height. In most cases…

view full answer...

Answer 4

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 5

Most leaf replacement trailer leaf springs are going to come with new bushings so I wouldn't anticipate you having to remove your old ones to install them in new springs. That said the bushings are removable if needed. Since we know your 2018…

view full answer...

Answer 6

The factory and even some aftermarket leaf spring and equalizer bushings are usually very poor quality and simply do not last but a few seasons. The breakdown of these bushings creates noise and then causes additional strain to be put on other…

view full answer...

Answer 7

Best option for a cushioned equalizer kit to replace a equalizer part #TREQ104 would be the EZ Flex part #K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts…

view full answer...

Answer 8

We don't have an exact kit with the components needed but we do have the parts individually like with the part #TRSL225 for the shackles and then for the bolts #166081 which includes the nuts as well. You'd need 8 bolts and then 14 shackles.

view full answer...

Answer 9

Your tandem axle utility trailer will likely have an equalizer like the Curved Equalizer #TREQ104. These would have been held in place by 3" Shackle Bolts #166081 and Nylon Bushings #721590 and Shackle Links #LC122487 on the ends of the…

view full answer...

Answer 10

It sounds like you want to remove the equalizer portion of the Dexter E-Z Flex Suspension Kit #K71-652-00 and replace it with your old one, which sounds like it is the Equalizer for 1-3/4" Wide Double-Eye Springs #TREQ104. To do this you will…

view full answer...

Answer 11

Best option for a cushioned equalizer kit to replace a equalizer part #TREQ104 would be the EZ Flex part #K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts as…

view full answer...

Answer 12

The 2-1/4" shackle straps are too short so you'll want to get a similar length. There isn't a kit that includes both wet bolts and the equalizer you have but you can get them separately. You'd just need one wet bolt kit and two (2)…

view full answer...

Recommend Bushings Needed For TruRyde Curved Equalizer # TREQ104

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching