Replacement Wet Bolts and Bushings for Dexter E-Z Flex Suspension Kit

Question

Question:

I have a Forest River Wildcat 34 WD with 6000lb axles and the ex-flex system. Looking for the correct wet bolt kit too replace the nylon bushings and bolts

asked by: James L

0

Expert Reply:

The Dexter E-Z Flex Suspension Kit like part # K71-652-00 comes with wet bolts and bronze bushings. If you're simply looking to replace the ones you have we do offer these parts, part # 34007-187-00 for the bolt, part # 006-092-01 for the nut, and part # D014-077-00 for the bushing.

expert reply by: Conner L

0

Answer 1

Best option for a cushioned equalizer kit to replace a equalizer part #TREQ104 would be the EZ Flex part #K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts…

view full answer...

Answer 2

Your tandem axle utility trailer will likely have an equalizer like the Curved Equalizer #TREQ104. These would have been held in place by 3" Shackle Bolts #166081 and Nylon Bushings #721590 and Shackle Links #LC122487 on the ends of the…

view full answer...

Answer 3

It sounds like you want to remove the equalizer portion of the Dexter E-Z Flex Suspension Kit #K71-652-00 and replace it with your old one, which sounds like it is the Equalizer for 1-3/4" Wide Double-Eye Springs #TREQ104. To do this you will…

view full answer...

Answer 4

First we do have the basic Curved Equalizer #TREQ104 which matches your 5-3/4" length and 2" height. As these are sold individually you will need 2 for your 1998 Fleetwood Terry camper. You might consider upgrading to a cushioned equalizer…

view full answer...

Answer 5

For 3500 pound axles with 24 inch springs the #e59SR is what you need. Springs stretch as they wear out so it's very normal for your measurement to be longer than the new springs. Also, the Tandem Axle Equalizer Kit #AP233 is also great for you.…

view full answer...

Answer 6

Best option for a cushioned equalizer kit to replace a equalizer part #TREQ104 would be the EZ Flex part #K71-652-00 which matches closely to the dimensions you have, does an excellent job cushioning the trailer suspension and comes with wet bolts as…

view full answer...

Answer 7

You will just need to wipe away the grease which does mean it all needs to be taken apart. Even a little bit of grease (over a long enough time) can cause the bushings to degrade. The shackle straps included with the Never Fail Tandem Axle Suspension…

view full answer...

Answer 8

The 2-1/4" shackle straps are too short so you'll want to get a similar length. There isn't a kit that includes both wet bolts and the equalizer you have but you can get them separately. You'd just need one wet bolt kit and two (2)…

view full answer...

Answer 9

Yes, the E-Z Flex Heavy Duty Rubber Suspension System part #K71-652-00 will be a direct upgrade for the EQ104 Equalizer. The part I really like about the E-Z Flex is that in addition to the cushioned equalizer upgrade which will help smooth out the…

view full answer...

Answer 10

Most leaf replacement trailer leaf springs are going to come with new bushings so I wouldn't anticipate you having to remove your old ones to install them in new springs. That said the bushings are removable if needed. Since we know your 2018…

view full answer...

Answer 11

Yes, it is a good idea to go ahead and add grease when installing the Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links #AP233. You don't want to use fat though, just go ahead and use the LubriMatic…

view full answer...

Answer 12

For a wet, step-bolt you can use #34007-187-00. It is sold in quantities of 1. For a bronze bushing use #D014-077-00 which is also sold in quantities of 1.

view full answer...

Replacement Wet Bolts and Bushings for Dexter E-Z Flex Suspension Kit

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching