What is Warranty of Fabric of Solera 12V XL Power RV Awning # LCV000334966-362243

Question

Question:

I bought a new 2017 keystone hideout trailer the awning is starting to rot at the rail channel just wondering. About the warranty I have a cover on the trailer when I’m not using it thanks

asked by: Paul G

1

Helpful Expert Reply:

The fabric of the Solera 12V XL Power RV Awning # LCV000334966-362243 that you referenced has a 5 year warranty, the roller has a 1 year warranty, and the electric components also have a 1 year warranty.

expert reply by: Jameson C

1

Paul G.

7/31/2020

what do i do to get the fabric replaced under warranty let me know thanks for the help

Jon G.

8/10/2020

I would start off by reaching out to whoever you purchased the awning from. The next step would be to reach out to Lippert directly https://www.lci1.com/contact

Answer 1

The Optronics LED Clearance or Side Marker Trailer Light is available in Red #MCL0030RBB and Amber #MCL0030ABB. These are the closest replacements to the Glo Brite 122r/122y lights you have. The lights only have one LED diode versus the 3 in your…

view full answer...

Answer 2

I was able to get confirmation from MaxxTow that there is not an available replacement shank for the MT70197, but because the hole sizes are the same as a standard weight distribution hitch shank you can use something like the Fastway e2 Weight…

view full answer...

Answer 3

The Fastway e2 Weight Distribution Shank, #FA92-02-4213, will work with your Reese weight distribution head. This shank and your Reese shank #RP54970 have the same width, bolt hole spacing and diameter. Typically, we recommend using a shank from the…

view full answer...

Answer 4

I would be happy to go over how to determine the correct weight distribution system for towing your 1946 Spartan Manon Travel Trailer, but you will need to confirm the total tongue weight of your trailer before deciding an a system. To determine the…

view full answer...

Answer 5

You are correct that a level trailer will be less likely to sway and keeping your hitched trailer level will enable a weight distribution (WD) system to function at its best. It is perfectly okay for a hitch ball to be an inch or so higher than the…

view full answer...

Answer 6

Yes, the Fastway Weight Distribution Shank part #FA92-02-4213 can be used in the rise or drop position.

view full answer...

Answer 7

Yes, you can use the Fastway weight distribution shank #FA92-02-4213 with Pro Series RB3 system #PS49581. The shank has 3/4 inch diameter holes spaced 1-1/4 inches apart which is the most common hole size and spacing for weight distribution systems.

view full answer...

Answer 8

Hey Clyde, the best way to pick out a weight distribution system is to go with a system that has a tongue weight range where your trailer's tongue weight when loaded falls right into the middle of. Doesn't have to be exactly in the middle but…

view full answer...

Answer 9

Hey Kevin, yes the Fogatti InstaShower 9 with Black Door #FG25FR would be as simple of an install as what you mentioned. Each of the connections you mentioned would need to be made and you'd be set. The controller that comes with this would be…

view full answer...

Answer 10

It looks to me that you will want additional spacers to provide better weight distribution on your 2019 Ram 1500. The Fast Way e2 Weight-Distribution Hitch #FA94-00-1061 is capable of having up to 9 spacers to provide the correct pinion angle on the…

view full answer...

Answer 11

The thickness of the Spacer Washer for Fastway e2 Weight Distribution Head #FA92-04-9655 is 1/16" thick.

view full answer...

Answer 12

The part you referenced, #FA92-04-9655, are the replacement spacer washers for all Fastway e2 weight distribution systems such as #FA92-00-0600. These washers slide onto the Fastway's spacer rivet, which we also have replacements for with part…

view full answer...

What is Warranty of Fabric of Solera 12V XL Power RV Awning # LCV000334966-362243

Product Page this Question was Asked From

Continue Researching