Compatibility of EZ Lube Grease Caps on Standard Axle
Updated 07/16/2020 | Published 07/14/2020
Question:
I ordered this ezlube kit based on the numbers on the bearings, but neglected to realize that this axle has the 2 different setups the ez lube and the standard and we have the standard The parts are all the same except for the dust cap and the double lip seal. My question is, am I safe using this ezlube kit on a no ez lube axle?
asked by: Rodger L
Helpful Expert Reply:
The Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs # DBRKHW35EZ is safe to use on standard axles and the double lip seal will also seal well on that axle. There is no need to get a standard grease cap as the function will be the same in keeping debris out and grease in.
Product Page this Question was Asked From
Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 3500 lbs
- Bearing L68149 and L44649
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 6~190
- Search Results: 6~191
- Search Results: grease cap
- Q&A: Replacement Rubber Plugs for Grease Caps on Marine Trailer
- Video: Pollak 6-Pole, Round Pin, Trailer Wiring Connector Review
- Video: Feature Review Replacement Nut Retainer for 6-191 Jam Nut
- Video: Review of Dexter Trailer Axles - Trailer Spindles - Trailer Suspension Parts - DX82CR
- Q&A: Will These Grease Caps part # RG04-010 Fit my Dexter Axle
- Q&A: How To Tighten Spindle Nut on EZ-Lube Spindle
- Q&A: Replacement D Tang Spindle Washer for E-Z Lube Spindle on 3500-lb Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Pollak 6-Pole, Round Pin, Plastic Wiring Socket w/ Rubber Boot - Vehicle End
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - 3,500 lbs
- Shop: Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs
- Shop: Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot - Vehicle End
- Shop: D Washer for EZ Lube Spindles
- Shop: Replacement Trailer Axle Spindle Retainer Kit for Dexter Axles Manufactered After June 2002
- Q&A: Replacement Hub for a AL-KO 8460
- Q&A: Dimensions of Replacement Rubber Grease or Oil Cap Plug
- Video: Choosing the Right Type of Trailer Light
- Video: In-Depth Review of the Grease Cap, 2.44" OD Drive In with Plug
- Video: Ultimate Overview of the Grease Seals 10-36 (pair)
- Article: Most Popular Wheel Bearings
- Q&A: Does 3,500 lb E-Z Lube Spindle Work With 3,500 lb DeeMaxx Disc Brake Kit
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Maintenance Schedule
- Article: Double-Eye Trailer Suspension System Review
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How Much Does a Boat and Trailer Weigh?
on Accessories and Parts
