Do E-Z Lube Axles Need Bearings to be Packed by Hand
Updated 10/01/2020 | Published 09/29/2020
Question:
Do I need to pack bearings by hand even though it’s an e z lube axle ? Or is it just as good to use the zerk fitting. Thanks.
asked by: Perry G
Expert Reply:
With an E-Z Lube axle, the bearings need to be packed by hand the first time. After that, the zerk fitting and grease gun will be able to properly grease the bearings without the need to pack them by hand again.
Though, it is good practice to regularly check for wear and tear. Even the E-Z Lube axles can experience this and may need to be replaced eventually. It's recommended to check your bearings and spindle at least once a year.
Product Page this Question was Asked From
Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- 3500 lbs
- 6000 lbs
- Brake Pads
- Kodiak
more information >
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: bearing grease
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-3/4 - Pre-Greased
- Search Results: trailer wheel bearings
- Search Results: bk1~150
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Q&A: Recommended Galvanized Trailer Idler Hub for Trailer with 3,500 Lb Axle
- Q&A: Upgrading 4.80x12 Tires On A Popup Trailer
- Article: Most Popular Wheel Bearings
- Video: etrailer 7 Way Upgrade Kit With Junction Box Installation
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Q&A: Does 7-Way Upgrade Kit part # e99011 Fit 7-Way of 2013 Ford F-150
- Search Results: 7 way connector
- Search Results: dust cover
- Search Results: dexter hub cap
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Video: The Low-Down on the Trailer Axle with Idler Hubs
- Video: Review of the Dexter Trailer Idler Hub Assembly for 3,500-lb Axles
- Video: Measuring To Choose The Right Trailer Axle
- Video: Trailer Axle with Idler Hubs Spec Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: When Should Trailer Wheel Bearings be Replaced
- Article: 7 Common Questions Everyone Has About Trailer Tires
on Accessories and Parts
