Replacement Jack for Bulldog BD154107

Question

Question:

Hello I need a jack with a wheel for my new trailer. It came with a bulldog swing jack. Can you please tell me which jack will be a direct replacement in terms of loosing the nut on the bracket and taking the old jack out and putting the new one with the wheel. I want one that has the same middle bolt in the middle. Can you please give me some options. See pics

asked by: Carlos F

0

Expert Reply:

In terms of a direct replacement for the same mounting method as your Bulldog # BD154107, you'll want to use the Fulton # FXP15W . which will bolt on to your existing welded on jack mount and comes with a wheel. The main difference between these two jacks is that the tongue weight capacity of the Fulton # FXP15W is only 1500-lbs, as opposed to the 2000-lbs of the Bulldog jack you're replacing. As long as the tongue weight of your trailer is less than 1500-lbs though it shouldn't be an issue.

expert reply by: Erik B

0

click to enlarge

Answer 1

The difference between top wind and sidewind is really mainly about personal preference and somewhat about clearance. Basically which way to you want to crank the jack? Horizontally or vertically? Based on your picture you'd easily be able to use…

view full answer...

Answer 2

You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side…

view full answer...

Answer 3

Hi Todd, I do have a drill-powered A-frame jack for your enclosed trailer that meets all of your needs, and what I recommend for you is the Lippert Quick Drop Tongue Jack #LC733926. The #LC733926 just requires a 3/4" socket which you can use…

view full answer...

Answer 4

The Replacement Bearing for etrailer and Ram Square Jacks - 7,000 lbs #TJD-7000-BR is 1/2 inch; it is does not have a weight capacity itself, but is designed specifically as a replacement for the following 7,000 lb etrailer and Ram jacks: - Square…

view full answer...

Answer 5

Your picture didn't make it through and I am not sure what product you are interested in.

view full answer...

Answer 6

The jack mounts used on a-frame trailers usually follow an industry standard pattern which is a 2-1/4" hole opening and three mounting holes spaced 3" apart. I have attached a photo to show this for you as well. If your trailer coupler does…

view full answer...

Answer 7

Most likely the #FXP15W would work great as a replacement for what you have but it's hard to verify that without seeing how what you have now mounts to the trailer. If you could send me a picture of what you have I can verify.

view full answer...

Answer 8

Thank you for providing the picture of your existing mount. This was helpful to idenfication and I have attached it to this post. As you mentioned, the 90 degree snap in holes are 3" apart from center to center. It may be helpful to note that…

view full answer...

Answer 9

If you can get me a picture of the bracket you have welded to your trailer I can most likely identify what jack would bolt to it. For example if your bracket looks like the one I attached a picture of the Fulton jack part #FXP15W would fit and work…

view full answer...

Answer 10

The Fulton Bolt-Through Swivel Jack, part #F1411300301 will allow you to use the existing bracket welded to your trailer frame. The jack has a 1500 lb lift capacity, so if your trailer's tongue weight is less than that amount, it'll work…

view full answer...

Answer 11

What would work as a replacement for your Fulton 1,200 lb jack that I would recommend is the Fulton Round, Snap-Ring Swivel Marine Jack #FTJ120W0301. In your pictures you did not include one that shows the bracket that attaches to your trailer mount,…

view full answer...

Answer 12

The Fulton Bolt-Thru Swivel Marine Jack part #FXP10W0301 does not come with the bolt-thru swivel bracket you will need to attach it to the trailer. For this, you can use the part #P9012-00. The plate that you are referring to will attach to the above…

view full answer...

Replacement Jack for Bulldog BD154107

Featured Help Information

Miscellaneous Media

Continue Researching