Installation Instructions for the Tekonsha Wiring Part # 118778

Question

Question:

Is there a video of the installation of the wiring harness on the 2019 Ridgeline

asked by: George

0

Expert Reply:

I currently do not have any install videos of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118778 on the Ridgeline even in different years. I have linked the instructions for you and overall it is not a very involved installation. The plug and play nature removes the need to cut, splice or modify your factory wiring.

expert reply by: Randy B

0

Answer 1

While we don't have a video I can hopefully explain how to remove the cap of the wiring on your 2017 Honda Ridgeline to install the trailer wiring #118288. Remove the connector from the cross-member using a pry tool like #ALL648544. Remove the…

view full answer...

Answer 2

This can be a bit tricky but it sounds like you might be looking in the wrong spot on your 2019 Honda Ridgeline to install the T-One Vehicle Wiring Harness #118778. The directions don't do a great job of making this more transparent but the…

view full answer...

Answer 3

In order to remove the cap to install the #118778 you need to remove the dark blue fastener from the housing by sliding it rearward. Unfortunately I do not have a picture of the locking tabs but they are on the side of the connector. Pressing down on…

view full answer...

Answer 4

It can indeed be difficult to locate the correct pigtail that is needed for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118778 on your 2017 Honda Ridgeline but I assure you this is present. That said, others have had…

view full answer...

Answer 5

Thank you for the pictures! It looks like you found the connector for the pigtail with the 4-Way from the T-One #118778 on your 2019 Honda Ridgeline. The reason that you are having trouble finding the connector that the black box plugs into is…

view full answer...

Answer 6

The pictures that come with the installation instructions for the T-One #118778 are kind of the end result of finding that wiring connector. If you look at the pictures I attached from the equivalent T-Connector #C56365 from Curt you get more of a…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Installation Instructions for the Tekonsha Wiring Part # 118778

Continue Researching