Availability of Silver Striker Plate for RV Door Latch

Question

Question:

Is the striker in this kit available separately? All I need is the Silver Striker but cant find it on the site

asked by: David W

0

Expert Reply:

We have a silver striker plate available with the part number # 295-000022 which it sounds like you are in need of.

expert reply by: Jameson C

0

Answer 1

Hey Anthony, do you have a cam lock currently? Like on the outside all you see is a lock core and on inside there's a little arm that grabs the inside of the door? Or is there a cut out already? Either way you could use a slam latch like the part…

view full answer...

Answer 2

The latch piece on the back of the Bauer Products RV Baggage Door Slam Latch #BA57FR is fixed in place. If you have experience with modifying things then you might be able to shift some stuff around but it's not something that you can simply pop…

view full answer...

Answer 3

Hey Mark, I found a couple articles online that said it should be possible by just making some holes bigger but I was not able to find a walk through or guide on exactly what to do. I would think a mounting plate style lock like the part #GL34FR…

view full answer...

Answer 4

From the images you attached, it appears you have what is typically used as a baggage/storage door latch. Because our entry door latches are designed for common RV door thickness of greater than 1", I suggest the Global Link Locking Baggage Lock…

view full answer...

Answer 5

Please note the attached image of the Bauer Products RV Baggage Door Slam Latch, #BA57FR. If you think you may have ordered the incorrect item, please forward an image of what you have and measurements. This part is specifically made to replace the…

view full answer...

Answer 6

Hey Scott, The Global Link Locking Baggage Lock Actuator Set with Mounting Plate #GL34FR requires a cutout hole measuring approximately 3.75" x 3.75" and a door thickness of 0.7" to 1.25" thick. Overall it's 5" wide x…

view full answer...

Answer 7

I do not currently have an electronic version of installation instructions available to forward to you for the Bauer Products RV Baggage Door Slam Latch, #BA57FR. However, please note the linked product review and installation videos. The…

view full answer...

Answer 8

The nut you are seeing in the inner pipe is not designed to be replaced. It sounds as if your jack was wound past is working limit and either broke or ruined the threads on the lift rod. You will need to replace the jack, if this is the case.

view full answer...

Answer 9

I understand your frustration, I can help you out with this. **Global Link Replacement Strike Plate for RV Entry Doors - Steel #295-000022. If your strike plate is like the one above I suggest mounting it with the hole closer to the top of the plate.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Availability of Silver Striker Plate for RV Door Latch

Product Page this Question was Asked From

Continue Researching