Height of Valterra T01-0091VP Drain Connector

Question

Question:

Hi, what is the total height of this. Wanting to measure space needed under the shower pan.

asked by: Stephen

0

Expert Reply:

I've provided a photo showing the dimensions of the Valterra # T01-0091VP drain connector.

expert reply by: Mike L

0

click to enlarge

Answer 1

In order to drain your gray water tank with the Valterra #T1001C, which has a 1-1/2" MPT end threads onto sewer system pipe, you'll want to use the Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT…

view full answer...

Answer 2

Hey Wyatt, so we have a hose that was designed to be used with the #T01-0091VP with the part #W01-4180 which does have a different thread size. This is intentional so that someone doesn't use a standard garden hose that someone might attempt to…

view full answer...

Answer 3

I recommend using the Valterra Gray Water Drain Connector #T01-0091VP you mentioned. This has a 1-/1/2" FPT connector on one end, and a 3/4" MPT fitting on the other end to connect to a flushing hose like #W01-4180. The #T01-0091VP keeps a…

view full answer...

Answer 4

If you have the Valterra Waste Valve for RV Gray Water Tank, #T1001C installed to your 1-1/2" sewer pipe and this valve is then attached to a Valterra gray water drain adapter, #T01-0091VP, then to a garden hose, yes, I can see that you are…

view full answer...

Answer 5

It sounds like you need Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT Item #T01-0091VP. Or possibly Valterra 90-Degree Drain Elbow - 1-1/2" Female Swivel x 3/4" Barb Item #RF890. Or Valterra 90-Degree…

view full answer...

Answer 6

To connect a standard garden hose part #W01-4180 (15') or #W01-4300 (25') to your Valterra Waste Valve #T1001D you will need an adapter like part #T01-0094VP or part #T01-0091VP which has a 90 degree elbow on it. Simply remove the cap off of…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Height of Valterra T01-0091VP Drain Connector

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching