Adapter to Drain Gray Water Tank Using a Regular Garden Hose

Question

Question:

Hello, I have a 2015 Rockwood high-wall 276 series pop up trailer. This is my first trailer and I am trying to find a gray water hose to fit where i Drain it. It is smaller then my sewer hose I am thinking it 1 1/2 or 2 in in diameter. do you sell something i can put on it to drain it using a regular garden hose? Thanks so much

asked by: Heather W

0

Expert Reply:

It sounds like you need Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT Item # T01-0091VP. Or possibly Valterra 90-Degree Drain Elbow - 1-1/2" Female Swivel x 3/4" Barb Item # RF890. Or Valterra 90-Degree Drain Elbow - Flange x 3/4" Barb - Polypropelene Item # RF839 depending on the design of your gray water tank drain.

expert reply by: Michael H

0

Answer 1

In order to drain your gray water tank with the Valterra #T1001C, which has a 1-1/2" MPT end threads onto sewer system pipe, you'll want to use the Valterra Gray Water Drain Connector - 90-Degree - 1-1/2" FPT to 3/4" MPT…

view full answer...

Answer 2

Hey Wyatt, so we have a hose that was designed to be used with the #T01-0091VP with the part #W01-4180 which does have a different thread size. This is intentional so that someone doesn't use a standard garden hose that someone might attempt to…

view full answer...

Answer 3

I recommend using the Valterra Gray Water Drain Connector #T01-0091VP you mentioned. This has a 1-/1/2" FPT connector on one end, and a 3/4" MPT fitting on the other end to connect to a flushing hose like #W01-4180. The #T01-0091VP keeps a…

view full answer...

Answer 4

From the larger end to the bottom of the pipe on the Valterra 90-Degree Drain Elbow #RF890 measures 2" while the threaded portion measures 1-3/4" (see attached). Since sink drain size can vary I'm not really able to give you an accurate…

view full answer...

Answer 5

Yes, the Valterra 90 Degree Drain Elbow #RF890 will fit into the 1-1/2" Valterra Shower Drain #A01-2012VP.

view full answer...

Answer 6

I went out to the warehouse and measured 90 degree drain elbow #RF839. From the top of the opening to the bottom of the elbow is 3.2 inches. To the start of the barbed portion it is 2.2 inches. The overall height is 3.68 inches. I included a picture…

view full answer...

Answer 7

Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…

view full answer...

Answer 8

To connect a standard garden hose part #W01-4180 (15') or #W01-4300 (25') to your Valterra Waste Valve #T1001D you will need an adapter like part #T01-0094VP or part #T01-0091VP which has a 90 degree elbow on it. Simply remove the cap off of…

view full answer...

Answer 9

If you have the Valterra Waste Valve for RV Gray Water Tank, #T1001C installed to your 1-1/2" sewer pipe and this valve is then attached to a Valterra gray water drain adapter, #T01-0091VP, then to a garden hose, yes, I can see that you are…

view full answer...

Answer 10

I've provided a photo showing the dimensions of the Valterra #T01-0091VP drain connector.

view full answer...

Answer 11

If you can't place any weight on the trailer in any way that limits a lot of the options. Basically you'd have to decide if you could fit in in the interior or use a bunk like part #CC-255 as a platform on the tongue of the trailer. This is…

view full answer...

Answer 12

I have a good solution but the Draw-Tite Max-Frame Trailer Hitch Receiver part #75082 is not a confirmed fit. Instead the Ultra-Fab 2" Trailer Hitch Receiver part #UF35-946403 is one that can be customized to your trailer frame and give you the…

view full answer...

Adapter to Drain Gray Water Tank Using a Regular Garden Hose

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching