bing tracking image
Q & A Icon

90° Elbow Drain Connector With A 3/4 MPT Fitting  

Updated 10/03/2025 | Published 01/05/2022

Question:

I have a 2-1/4inch to 1-7/8inch drain Id like to connect an elbow off of to 3/4. Im trying to figure out what will fit on it. Does it have to be something like the 1-3/4inch P Trap, or can I use a 1-1/2inch Gray Water Drain Connector - 90-Degree - 1-1/2inch FPT to 3/4inch MPT. I have limited space and if the swivel drain connector is smaller Id like to use that.

0

Expert Reply:

I recommend using the Valterra Gray Water Drain Connector # T01-0091VP you mentioned. This has a 1-/1/2" FPT connector on one end, and a 3/4" MPT fitting on the other end to connect to a flushing hose like # W01-4180.

The # T01-0091VP keeps a low profile at 2-5/8" tall which should be small enough to fit in any space you need it.

expert reply by:
0
Bryce D
Dimensions of connector
Dimensions of connector
(click to enlarge)
Anita profile picture

Anita

10/2/2025

Okay let's see if I'm understanding that's right. The connector shown has a hose fitting for a 1 3/4" hose, the hose you are suggesting to go with it is a 1 1/2" fitting. Is this correct?

Jesse M. profile picture
Etrailer Expert

Jesse M.

10/3/2025

@Anita The Valterra Gray Water Drain Connector # T01-0091VP has 3/4" hose fitting so that would go with the flush hose # W01-4180 which has a 3/4" connector. Looks like the answer above needs to be edited :)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>