Compatibility of Tuson Brake Controller With 2016 Subaru Outback

Question

Question:

Hi there, Can you verify that this brake controller will indeed work with with my Subaru? Or is it only for Ford and GM? And what about the 325DL-50 model? Will it also work? What are the main differences? Thank you

asked by: Brian

0

Expert Reply:

The Tuson DirecLink Base Model Trailer Brake Controller - 1 to 4 Axles - Proportional # 335DL-100 is compatible with the 2016 Subaru Outback. You will simply use # ETBC7 to add the 7-way connector, wiring, and circuit breakers. If you don't already have the 4-way wiring harness, then I recommend starting with # 118467.

expert reply by: Jason S

0

Answer 1

Hey Arek, so it looks like Curt is the only brand of Bluetooth brake controllers but they do have two different types. They have the super popular Curt Echo Wireless Brake Controller #C51180 which just plugs into a 7-way and is controlled via the…

view full answer...

Answer 2

Hello Kevin. In regards to the Tuson DirecLink Base Model Trailer Brake Controller #335DL-100, the black 12v wire does need to be connected to the battery for constant 12v power. They also recommend that the white wire be connected to the negative…

view full answer...

Answer 3

Thanks for all the information and the picture! I would be happy to help you set up your 2019 Ford Escape to tow your new Aliner Expedition Camper. I did some research to confirm but your camper has the standard 7-way connector. 9-pin connectors are…

view full answer...

Answer 4

The Tuson DirecLink Base Model Trailer Brake Controller part #335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part #335DL-50 are both excellent options The best option for you will be dependent on where you will be doing most of your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 10

Hey Heidi. To use a Curt Echo Wireless Brake Controller item #C51180 on a tow vehicle with only a 4-way connector, you'll need the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation item #ETBC7L. The Curt Echo item #C51180 requires a…

view full answer...

Compatibility of Tuson Brake Controller With 2016 Subaru Outback

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching