Bearing Kit for Load Rite Boat Trailer with TDE Hub 46845
Updated 05/20/2020 | Published 05/19/2020
Products Featured in This Question
Question:
Hello, I have a load rite boat trailer with 2 different hubs. The one hub is TDE 46845 and the other is TDE 11033. The spindles look identical. The bearing numbers on 11033 are worn off. Would they be the same as tyhe 46845?. Bearing Kit BK 2 100. Thanks
asked by: John R
Expert Reply:
Based on my research a hub with a part number 46845 is a hub with a 5 on 4-1/2" bolt pattern and uses inner bearing # L68149 and outer bearing # L44649 like what the bearing kit part # BK2-100 that you referenced provides. The axle should have matching hubs on either side so both hubs should take this bearing kit.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Bearing Kit for TDE 46845 Hub
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Search Results: trailer bearings races seals caps
- Search Results: grease seal 10~19
- Search Results: ez lube grease cap
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: add coupon code
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: Breaking Down the D Washer for EZ Lube Spindles
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Video: A Closer Look at the Mounting Bolt for Brake Drum for Dexter Trailer Hub Assembly
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Idler Hub - AKIHUB-545-2-EZ-2K
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Timken Replacement Trailer Wheel Bearing - L68149
- Search Results: 46845
- Q&A: Replacement Hub/Rotor Assembly for a Dexter Boat Trailer Axle DX67HR
- Q&A: Difference Between etrailer and Timken Bearing Kit
- Q&A: Are D-Washers and Tang Washers Both Necessary on Trailer Spindle
- Q&A: Replacement D Tang Spindle Washer for E-Z Lube Spindle on 3500-lb Axle
- Q&A: Does Tang Washer Go Between Spindle Nut and Hub Washer
- Shop: Timken Replacement Bearing and Race Set - L68149 and L68111
- Shop: Dexter Bearing Kit for 1-1/16" to 1-3/8" Tapered Spindle
- Shop: Replacement Trailer Hub Bearing - L68149
- Search Results: 171255uc
- Search Results: l68149
- Video: A Closer Look at the TruRyde 2.44 Inch OD Drive In with Plug Grease Cap
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Video: Choosing the Best Trailer Bearing Races Caps and Seals