Recommended Wheel Bearing Grease and Grease Seal 2018 Jayco Jayfeather 23rl Travel Trailer
Updated 05/16/2020 | Published 05/07/2020 >
Question:
I have a 2018 Jayco 23rl Jayfeather Travel Trailer. Vin#J1JL0282 last 8 numbers with Lippert axles. What grease do you recommend for the wheel bearings and I also need new grease seals. What grease seals would you recommend and how many would I need? I assume there are only grease seals on the inner bearings so I would need 4 seals for a 4 wheel double axle trailer, is that correct? As for the grease I was thinking of Lubrimatic LMX grease Item # L11390. Would that be a good grease? Thank you.
asked by: Steve S
Helpful Expert Reply:
The # L11390 LMX Red grease is exactly what I'd recommend. It's what our installation crews typically use here at etrailer.com HQ.
I contacted Jayco regarding replacement grease seals. They were able to tell me that their part number for replacement seals is 0713491, but they couldn't provide the inner or outer diameter. If you'd prefer not to obtain them from Jayco, I can determine which ones you need if you could reply with the reference number from the inner wheel bearing and the diameter of the spindle where the grease seal rides.
Product Page this Question was Asked From
LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Standard Lithium Grease
- Lithium Complex
- 14 oz
- LubriMatic
more information >
Continue Researching
- Search Results: anderson leveler
- Q&A: Will Replacement Plastic Check Valve BM54GR Work On Nautilus P4 Control Panel?
- Shop: Replacement Plastic Check Valve for B&B Molders City Water Inlet - Black
- Shop: Replacement Plastic Check Valve for B&B Molders City Water Inlet - Polar White
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Q&A: Trailer Hub Grease Recommendation for Jayco JayFeather with Lippert Axles
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 12,000 lbs GTW, 1,200 lbs TW
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 12,000 lbs
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Video: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems Feature Review
- Search Results: sway bracket jacket
- Q&A: Overall Height of the 2-5/16" Hitch Ball # C40085
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Search Results: trailer tires and wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack


Steve S.
5/14/2020
I should have asked this question when I submitted an earlier question. My Jayco travel trailer is new and I have had it for two years. It has about 5,000 miles on it and I was wondering when I should repack the wheel bearings and replace the seals. I've been told I'm okay until 10,000 miles, but I've also read you should do it every year, which seems excessive to me. I've also had guys tell me they have never done their seals. I'm confused. Thank you.