bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. RV Steps Help Hub
  4. RV Steps Q&As
  5. Question 433499
Q & A Icon

Recommended Pull Out Step For 2011 Wildcat 302RLS With 27-5/8" Wide OEM Step  

Updated 04/21/2020 | Published 04/20/2020



Question:

Will lippert 4 step manual rv steps #358991 fit 2011 Wildcat 302RLS The oe steps are 27 5/8 inches wide and the opening is 28inches. Will these fit?

0

Expert Reply:

I do have options for you but the Alumi-Tread Manual Pull-Out Step for RVs - 8" Drop/Rise part # LC432698 (358991 is the manufacturer part number) will not fit properly because the opening on your trailer is 28" and the frame of the steps is 28" the fit will be too snug.

I recommend to use Flexco Manual Pull-Out Steps for RVs part # SMFP-2100 which is 27-5/8" wide for a perfect fit on your trailer if you want to utilize the space under the door for a pull out step. There is not a quad step option to fit that space.

If you want a quad step option, I recommend to use the SolidStep Manual Fold-Down Steps like part # LC791574. These steps stow inside the door way when not in use. This particular step fits door ways 26" - 29-7/8". The door entry height must be 35" - 44" from the ground for these steps to fit properly. If this model does not fit the measurements of your trailer please let know the doorway width and distance from the ground to the doorway entry.

expert reply by:
0
Heather A

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on RV Steps

Videos

Help Articles

Expert Answers

Others Also Watched
Detailed Breakdown of the Flexco Manual Pull-Out Steps for RVs
etrailer Electric Jack with Footplate Installation - 2011 Forest River Flagstaff Classic Super Lite
Fifth Wheel Towing Made Simple with Daniel
A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
How to Choose a Trailer Brake Controller
An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
Curt T-Connector Vehicle Wiring Harness Review C56040
Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
Comparing Portable Flat Tow Braking Systems - Curt RVi and Blue Ox Patriot
The Low-Down on the Alumi-Tread Manual Pull-Out Step for RVs
Others Also Read
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
4 Steps to Choosing Your 5th Wheel Pin Box
30-Amp and 50-Amp RV Service: What's the Difference?
How to Choose the Right Trailer Hitch Class
Brake Controller Installation: Starting from Scratch
How to Measure for Travel Trailer and Fifth Wheel Steps
Trailer Lighting Requirements
What are the Common Types of Propane Fittings Used on RVs?
Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
Others Also Asked
Availability of RV 4 Step that is 24 inches Wide

Hickory Springs does offer a 4 step model of their RV pull out steps with the part #SMFP-4400. These have the same dimensions as the triple step as well as same step design so it's exactly what you are wanting.

view full answer...
Dimensions of the Flexco Steps Part #SMFP-4400

That is hard to say, but what you can do is check out the dimensional picture I attached for the Flexco Steps part #SMFP-4400 and compare them to what you have to see how they would compare to what you currently have.

view full answer...
Dimensions of Flexco Manual Pull-Out Steps for RVs #SMFP-4400

The bolt to bolt distance on the Flexco Manual Pull-Out Steps for RVs, #SMFP-4400, measures 28-1/8 inches and the sliding bolt at it's highest point is approximately 3-1/2 inches below the mounting base. I have attached a dimensional diagram for…

view full answer...
Best Replacement for Lippert Radius Quad Steps 432693

The best option we have to replace the Lippert Radius Quad Steps 432693 is with the Alumi-Tread Manual Pull-Out Step part #LC432698. I spoke with Lippert and they stated this is the only available replacement for the discontinued model. Please note,…

view full answer...
Torklift GlowStep Replacement Support Bracket and Bolt

I have a solution for you but we don't have a replacement bracket to replace the support and bolt that was broken on your TorkLift GlowStep similar to the #TLA8004 . Instead you would need to use the Add-A-Step for TorkLift GlowStep Revolution…

view full answer...
Compatibility of the Alumi-Tread Manual Pull-Out Step on a 2017 Heartland Sundance 5th Wheel Trailer

The Lippert Alumi-Tread Manual Pull-Out Step, #LC432698, has a mounting base that measures 28 inches wide x 9-1/2 inches deep. See the attached picture. If your 2017 Heartland Sundance trailer has similar measurements, then the Lippert step assembly…

view full answer...
What is the Difference Between a Class II and a Class III Hitch?

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...
Lug Nut Torque Chart for Trailer Wheels

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...
Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...
What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...
Instructions to Wire a Trailer for Electric Brakes

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...
Dometic Soft Start for Dometic B59516.711C0-MX

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...