Replacement 171255 Grease Seal and Bearings For 1990 EZ Loader Trailer

Updated 04/21/2020 | Published 04/16/2020

Products Featured in This Question

Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy

(418)

$32.30

Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles

(2922)

$9.47

Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(3085)

$20.09

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2219)

$24.70

Replacement Trailer Wheel Bearing - L68149 - Qty 1

(2219)

$20.41

Question:

Axle seal area is a bit rough with the usual water intrusion. Has 1.98 a LE cap Uses L 68149 inner Bearing

asked by: Tom G

Expert Reply:

The replacement 171255 grease seal for your 1990 EZ Loader trailer is part # 58846 which measures 1.719 inner diameter and 2.565 outer diameter for a 3,500 lb axle. We do not carry a Bearing Buddy grease seal kit that has the correct diameter seal. The Bearing Buddy kit part # BB60010 has a larger diameter seal that will not fit your spindle.

expert reply by: Heather A

Tom

1/1/0001

Axle seal area is a bit rough with the usual water intrusion. Has 1.98 a LE cap Uses L 68149 inner Bearing

Heather A.

4/21/2020

The Spindle Grease Seal Set for L68149 Inner Bearing and 1.810 Bearing Buddy part # BB60010 because the diameter is too large for the spindle that takes a 171255 grease seal that you mentioned. If you have water damage on the spindle you can try to lightly sand any build up off the spindle with a fine grit sand paper. Just be careful not to over sand the area. The replacement individual grease seal is part # 58846. If you need a bearing kit, I recommend Bearing Kit for #84 Spindle part # BK2-100 which has a # L68149 inner bearing with a # L44649 outer bearing with the correct grease seal. This fits a standard #84 spindle, since you have a L68149 inner bearing this is what you need.