Replacement Rollers and Fenders For 1996 Shorelandr Trailer

Updated 04/08/2020 | Published 04/07/2020

Question:

I have a 1996 shorelander boat trailer i am looking for 12 rollers and a drivers side fender, i am attaching pictures, the picture is actually the passenger side, but i need the drivers side

asked by: Brian J

Expert Reply:

The rollers that you need based off of the measurements in your photo is Yates Ribbed Wobble Roller part # YR530R-8P which is a 3x5" ribbed roller with a 1" shaft opening. The fender is a bit harder for me to confirm without measuring.

It was very common for the older 1996 Shorelandr boat trailers to have 13" wheels, so you may be able to use Fulton Single Axle Trailer Fender with Top and Side Steps part # F008573 depending on the measurement between the mounting brackets. The Fulton fenders are 9" wide x 40" long x 12" tall with 28" between the mounting bracket slots. Please let me know if these measurements do not fit your trailer and I can make additional recommendations.

I have also attached a link to the available fenders with side steps.

expert reply by: Heather A