RoadActive Suspension Enhancement for 2004 GMC Denali with Quadrasteer

Published 03/20/2020

Products Featured in This Question

RoadActive Suspension Custom Leaf Spring Enhancement Kit

(511)

$539.00

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2626)

$23.25

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3881)

$20.93

Curt Hitch Lock - 2", 2-1/2", and 3" Hitches - Chrome

(67)

$24.72

Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 10,000 lbs GTW, 1,000 lbs TW

(843)

$620.53

Timbren Rear Suspension Enhancement System

(6408)

$269.36

Question:

I have an option for you, but the Roadmaster Active Suspension Custom Leaf Spring Enhancement Kit # RAS4611 is not compatible with the Quadrasteer system on your 2004 GMC Sierra Denali. Your best bet and the only confirmed suspension enhancement solution that won't interfere with your Quadrasteer components, is the Timbren Rear Suspension Enhancement System # TGMRCK25S. These hollow rubber springs sit above the rear axle to help stabilize and level your Sierra.

asked by: Dan H

Helpful Expert Reply:

I have an option for you, but the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS4611 is not compatible with the Quadrasteer system on your 2004 GMC Sierra Denali.

Your best bet and the only confirmed suspension enhancement solution that won't interfere with your Quadrasteer components, is the Timbren Rear Suspension Enhancement System # TGMRCK25S. These hollow rubber springs sit above the rear axle to help stabilize and level your Sierra.

expert reply by: Carla M

Dan H.

3/20/2020

Carla M.

3/20/2020

When it comes to weight distribution systems, you will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. This includes the weight of any cargo behind the rear axle of your Sierra. This can be a little tricky with a car hauler trailer since the loaded vs unloaded tongue weight can vary so much. With your empty tongue weight of 380 lbs, and the GVWR of the trailer being 10,000 lbs, your best option is the Strait-Line Weight Distribution System 12,000 lbs GTW, 1,200 lbs TW, part # RP66084. If you plan on maximizing the available capacity of your car trailer, your actual total loaded tongue weight will quite possibly exceed 1,000 lbs and taking into consideration the extra weight behind the rear axle of your truck, your empty tongue weight will be closer to 500 lbs. The # RP66084 has a tongue weight range between 600 lbs and 1,200 lbs, which will put you right in the middle of it and although your ride will be a bit stiff when the trailer is empty, this will be the case for any system rated heavily enough for your application and because it doesn't just rely on tension to control sway, you won't get as rigid of a ride as with # EQ37101ET. The Straight Line system also includes the weight distribution shank, which you will need since B&W adjustable ball mounts, like the Tow&Stows, cannot be used as a weight distribution shank. The dual-cam sway control also tends to track better during turns and swerves than 4-point systems. Adding a hitch lock, like the # C23025 you had picked out, is a great idea and will work perfectly with the shank on the Reese system. The only other thing you'll want to add to your cart is a hitch ball (if you don't already have one), since one is not included with the Straight Line system. For a 2-5/16 inch ball you can use # 19286 or # A-90 for a 2 inch ball.