Wiring Diagram For All In One Connector From Brake Buddy Stealth System

Question

Question:

What is the wiring diagram for the round 6 pin male connector that is one end of the umbilical cord. I have a 2017 Jayco Precept towing a 2019 Ford Ranger and I’m installing the stealth system

asked by: Dan K

0

Expert Reply:

One end of the umbilical cord that comes with the Brake Buddy Stealth Supplemental Braking System part # HM39530 is a 7-blade round connection that connects to motor home's 7-way plug. The other end is a 7-flat connector that plugs into the all-in-one connector on the Ford Ranger. I have attached a wiring diagram for the all in one connector for your reference.

expert reply by: Heather A

0

click to enlarge

Mel P.

9/5/2020

I need to make sure my motorhome plug is correct. I would like to see color codes as looking into the MH receiver. Thanks

Jon G.

9/8/2020

Are you talking about the 7-Way on your motorhome? If that's the case then I wouldn't know what color wires are used, but I do know what functions you need to test for to make sure everything is wired correctly. Check out the linked help article and scroll down to where it has the "Vehicle Side 7-Way" diagrams and compare that you what you find on your motorhome.

Helpful Links

faq-wiring.aspx

Les T.

3/21/2024

Hi Can you tell me where I can purchase a Breakbuddy stelth all in one conector as mine has a flat. I’m in UK

Heather A.

4/9/2024

@LesT We unfortunately do not ship to the UK. If you can find a hub that we can ship it to and they can ship it to you the part number is part # HM39531 for the all in one connector.

Answer 1

The BrakeBuddy Towed Vehicle Battery Charge Kit part #BB54FR comes with a the Brake Buddy Select 3 Portable Supplemental Braking System part #HM39524. I have attached a wiring diagram of how this is setup with the Brake Buddy.

view full answer...

Answer 2

Thanks for all the information Rene and welcome back! The Roadmaster Direct-Connect Base Plate Kit item #RM-521643-5 is exactly what you need for your 2021 Kia Soul with a manual transmission. It is compatible with your Falcon 2 Tow Bar item #RM-520.…

view full answer...

Answer 3

Yes, the the Roadmaster Tail Light Wiring Kit with Bulbs, #RM-155 can be used with the Brake Buddy Classic 3, #HM39494. We actually have an install video created for the Brake Buddy Classic 3, #HM39494, see link below. This is located on the product…

view full answer...

Answer 4

Yes, the Brake Buddy Stealth Supplemental Braking System, #HM39530 does require the installation of the brake controller to properly function. Please see the attached product review and installation videos.

view full answer...

Answer 5

Both the Brake Buddy Select 3 #HM39524 and Brake Buddy Classic 3 #HM39494 would be great choices for your 2022 Jeep Wrangler Sahara, but for the most customizable option you'll want the Select 3 #HM39524. The main difference between these two…

view full answer...

Answer 6

The battery of your 2023 GMC Sierra 1500 Denali does need to be disconnected like you mentioned. We have an automatic disconnect that we have installed on a similar Sierra with the part #RM-766 which I attached an install video for on this page. You…

view full answer...

Answer 7

Hello Garry, thanks for reaching out. The plug your are referring to on the Curt #C96JR is actually an accessory port for plugging in a 4-flat trailer harness. The weird part is, Curt stopped offering the 4-flat accessory plug while leaving the…

view full answer...

Answer 8

It sounds like you are asking about connecting the breakaway switch of the Brake Buddy Classic 3 Portable Supplemental Braking System #HM39494. I cut out some pages from the instruction manual for you to check out, but what you'll do is actually…

view full answer...

Answer 9

Currently the only replacement parts we have for the Brake Buddy Stealth Supplemental Braking System #HM39530 are as follows. Replacement Flex-Coil Adapter #HM39532 Replacement All in 1 Connector Socket #HM39531 Replacement Dual Controller #HM39533…

view full answer...

Answer 10

Hey Jim. The Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR is indeed compatible with the LED lights on your 2025 Jeep Wrangler Unlimited. It plugs into your factory wiring harness behind the tail lights. The only issue would be if…

view full answer...

Answer 11

Typically when using D-Ring adapters #BX88357 you'll have to snake some shorter cables, like #RM-910648-20 around the frame rail of the vehicle and then out to the front of the vehicle to connect to your safety cables. There's no easy…

view full answer...

Answer 12

I spoke with Roadmaster and they stated the plug-in hybrid would be the same fit. You will want to make sure you follow your owner's manual to ensure you are properly set up to flat tow if your vehicle is able to. To flat tow your 2021 Ford…

view full answer...

Wiring Diagram For All In One Connector From Brake Buddy Stealth System

Continue Researching