Dimensions of Replacement Friction Disc for Fulton 1,500 lb Trailer Winches # F143100 and # F142201

Question

Question:

What are the actual measurements please.

asked by: Mike J

0

Expert Reply:

The Replacement Friction Disc, part # F501115 (for Fulton 1,500 lb Trailer Winches # F143100 and # F142201) has an overall diameter of 2-1/4 inches, center hole diameter of 1/2 inch and a thickness of 3/32 inch.

The replacement pinion shaft repair kit for the same winches is also available as part # F501118.

expert reply by: Carla M

0

click to enlarge

Answer 1

There is indeed a suitable replacement. The Fulton 1588S00 was replaced by the #F501115 which we carry. They are sold in a quantity of 2.

view full answer...

Answer 2

The discs you are looking for can be found right here Replacement Friction Discs for Fulton Brake Winch - 1,500-lbs - Qty 2 #F501115. These will replace two friction discs on your Fulton High-Performance Brake Winch - Winch Only - 1,500 lbs #F143100

view full answer...

Answer 3

Hey Howard, the correct replacement handle for the Fulton Winch part #F143100 would be the part #F501101.

view full answer...

Answer 4

Yes, the Dutton-Lainson Hand Winch #DL14964 is an exact replacement for model DLB1500A and with it you can use 50-foot winch cable #DL24104.

view full answer...

Answer 5

That's actually a really good question and you aren't missing anything. To be able to add and use the Drill Drive Socket Adapter #DL6456 with the Dutton-Lainson Hand Winch #DL14964, you'll also need to replace the stock handle with part…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Dimensions of Replacement Friction Disc for Fulton 1,500 lb Trailer Winches # F143100 and # F142201

Continue Researching