Replacement Handle for Fulton Winch F143100

Question

Question:

I have a Fulton F143100 Brake Winch but need a replacement handle. Please provide item number. thanks

asked by: Howard K

0

Expert Reply:

Hey Howard, the correct replacement handle for the Fulton Winch part # F143100 would be the part # F501101.

expert reply by: Jameson C

0

Jameson C.

1/27/2026

Hey Howard, how did the replacement handle for your Fulton brake winch work out? Knowing how it fit could help others looking for the same part.

Answer 1

Yes, the Dutton-Lainson Hand Winch #DL14964 is an exact replacement for model DLB1500A and with it you can use 50-foot winch cable #DL24104.

view full answer...

Answer 2

That's actually a really good question and you aren't missing anything. To be able to add and use the Drill Drive Socket Adapter #DL6456 with the Dutton-Lainson Hand Winch #DL14964, you'll also need to replace the stock handle with part…

view full answer...

Answer 3

The Replacement Friction Disc, part #F501115 (for Fulton 1,500 lb Trailer Winches #F143100 and #F142201) has an overall diameter of 2-1/4 inches, center hole diameter of 1/2 inch and a thickness of 3/32 inch. The replacement pinion shaft repair kit…

view full answer...

Answer 4

Hey Bill, I have a solution for you but the handle of the #DL14964 does not have an easily removable handle. Instead I would recommend the DLB winch part #DL15721 with the removable handle kit part #DL84FR. That must have been a popular winch for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Replacement Handle for Fulton Winch F143100

Continue Researching