Is Hardware of Replacement Mounting Hardware # 21-2355PK Available By Itself

Question

Question:

Can I order just the hardware without the brackets?

asked by: Stuart S

0

Expert Reply:

The only way to order the hardware of the Replacement Mounting Hardware # 21-2355PK is the entire kit as just the hardware by itself is not available.

expert reply by: Jameson C

0

Trenton H.

5/28/2020

I took some bars off a truck like mine but I don’t know what type of oval brackets it takes

Chris R.

6/1/2020

Unfortunately I wouldn't be able to track this down for you. Do you know what model/brand step bars they are?

Answer 1

The correct Westin HDX Drop Nerf Bars for your 2018 Ram 3500 crew cab is the part #56-135652 which means the correct hardware kit is the part #56-135PK.

view full answer...

Answer 2

The Replacement Mounting Hardware Kit for Westin HDX Nerf Bars with Drop Steps #56-135PK is sold as a kit including the brackets and is not available without the brackets.

view full answer...

Answer 3

The Replacement Mounting Hardware #21-2355PK that you referenced is designed to replace the hardware used for the Westin PRO TRAXX Oval Nerf Bars #21-23550 (Polished Stainless Steel) or #21-23555 (Black Powder Coated Steel). I have attached an…

view full answer...

Answer 4

The Westin Hardware Kit for HDX nerf bars part #56-1372PK that you referenced comes with hardware for both sides of the vehicle.

view full answer...

Answer 5

The first thing that you will need to note is that Nerf Bars and Running Boards are vehicle specific. If the Westin Nerf Bars that you have were pulled off of a vehicle other than a 2007 Chevrolet Silverado 1500 New Body then there is a very good…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

Hi Arthur, I took a look at your list of parts to flat tow your 2026 Jeep Wrangler Rubicon and it looks like you have almost everything you need! For the Blue Ox Patriot Supplemental Braking System part #BLU37TR, it plugs directly into a 12V outlet…

view full answer...

Answer 11

Hey Bill! You can swap out the 4-way for a 6-way and use a 7-way to 6-way adapter which will allow you to add the charge line #DM66VR. The Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit #RM-146-7 has what you need to complete the installation. Where are…

view full answer...

Is Hardware of Replacement Mounting Hardware # 21-2355PK Available By Itself

Product Page this Question was Asked From

Continue Researching