How to Determine Correct Hub Replacement for 1994 Jayco Eagle SD with Dexter Axle

Published 03/05/2020

Products Featured in This Question

Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs

(830)

$231.37

Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings

(915)

$74.69

Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles

(3563)

$18.83

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2216)

$24.70

4" Carbon Fiber Digital Caliper

(27)

$12.42

Question:

It's a 4 lug and I measured it, it's a straight spindle measuring at 1.06

asked by: Gabriel

Expert Reply:

I'm happy to help find a hub replacement for your Jayco Eagle, but in order to find the correct one, I'll need to know the inner and outer bearing numbers as well as the grease seal inner and outer diameter. You could alternatively use a digital caliper # PTW80157 to measure the portion of the spindle on which each component rides. From your photos it appears your wheel bolt pattern is a 4 on 4, but you'll want to confirm that just to be sure. Below are a couple diagrams to help.

expert reply by: Carla M

click to enlarge

Gabriel

3/5/2020

It's a 4 lug and I measured it, it's a straight spindle measuring at 1.06

Carla M.

3/5/2020

Based on those measurements, the correct replacement is the Dexter Trailer Idler Hub Assembly for 2,000-lb Axles # 8-91-05UC1. This hub uses inner/outer bearing # L44649 (1.063 ID) and a grease seal with an inner diameter of 1.50 inches, so as long as the portion of the spindle on which the seal rides matches up with this measurement, this is the correct replacement hub for your 1994 Jayco Eagle SD trailer. For future maintenance, the correct bearing kit to service this hub is part # BK1-150.