How To Measure Roller Shaft Size For Wobble Roller on 2006 LoadRite Boat Trailer
Question:
not sure how to measure shaft from top to bottom curved part or left to right flat part of shaft to get size of shaft,thanks
asked by: Tom
0
Expert Reply:
On the shaft of your LoadRite boat trailer you will want to measure the diameter of the shaft at the widest point, which is probably the top to bottom of the curved part of the shaft.
It should measure 1-1/8 inches for the Yates TPR Ribbed Wobble Roller, part # YR500YW-9P, to fit.
If you have access to a roller that was on the shaft of the LoadRite boat trailer you will want to measure the diameter of the center hole of the roller and the width and diameter of the roller to help determine what size you will need.
expert reply by:
Jeff D
0
Product Page this Question was Asked From
Yates Ribbed Wobble Roller - TPR - 5" Diameter - 1-1/8" Shaft
- Boat Trailer Parts
- Rollers
- Wobble Roller
- 3 Inch Wide
- 5 Inch Diameter
- Thermoplastic - Non-Marking
- Fits 1-1/8 Inch Shaft
- Yates Rubber
more information >
Continue Researching
- Q&A: Are Special Tools Needed to Attach Wobbler Rollers to a Shaft Using Retaining Rings
- Q&A: Replacement Slipper Springs for EZ Loader Trailer with 26-1/4 Inch Springs
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: Using a Weight Distribution System on a Boat Trailer With Surge Brakes
- Q&A: Replacement For Dexter DX12.5 Brake Actuator on Boat Trailer
- Q&A: Will Dutton-Lainson Ball Adapter Plate Work With Power Winch 912
- Q&A: How To Figure Out the Correct Replacement Hubs for EZ Loader Boat Trailer
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer