2019 Ram 2500 Pin Weight Capacity and Fifth Wheel Recommendation

Question

Question:

I have a 2019 ram 2500 crew cab short bed 6.7 Cummins. I am so confused about how much hitch weight I can have. Can you clear this up for me?

asked by: Randel L

1

Helpful Expert Reply:

I was able to find some information for you. On your 2019 Ram 2500 CC SB with the 6.7 cummins you will have a payload capacity of right at 2500 lbs. Payload can be used as the maximum allowable pin weight.

With that said the M5 Series 5th Wheel Trailer Hitch - Single Jaw - 20,000 lbs part # RP30928 that you looked at would be a perfect fit for your trucks payload. It offers a max 5000 lb pin weight and will work with trailers up to 20,000 lbs.

If you don't already have fifth wheel rails use Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches part # RP50054-58 this will provide you with the connection point needed to set your fifth wheel into.

IF your Ram has the OEM puck system in it you will use Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs part # RP30154 to give you that connection point.

expert reply by: Randy B

1

Troy W.

6/16/2024

Does the hitch add to the capacity to the pin weight. Also would adding air bags help increase weight?

Reply

Kevin C.

6/17/2024

@TroyW Anything in the bed from the rear axle back is going to count towards your pin weight, so this would include the 5th wheel hitch. Adding in air springs will not increase the capacity of the truck but would help you level the truck back out while hauling. This will help with braking power, overall handling, and keep your head lights pointed down at the ground instead of up at the car in front of you. If you're interested in adding some air springs to your truck I'd need to know the year/make/model of the and if it's 2WD or 4WD.

Reply

Answer 1

Hey Randy, we have what you need but you will need to measure the width of your pin box to determine which capture plate you need. If it's 13-3/8 inches wide you'd want the part #PUL26RR or if it's 13-5/8 inches you'd need the part…

view full answer...

Answer 2

From Rep at PullRite, you will need to measure from the front edge of your king pin to the leading edge of the king pin plate to identify which you should use with your Rota-Flex 5th Wheel Pin Box and #LC328330. See the attached image I provided with…

view full answer...

Answer 3

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 4

The RED grease is the best grease for trailer hubs. It's marine grade and the most heavy-duty grease around so its what we recommend the most. For that you would want #L11390. This grease also happens to be the most universal. You are going to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Micah! Pacbrake has actually been around for a long time, more than 60 years. We have had customers ask for these air bags in the past, and we've seen them on vehicles coming in. Until now, Firestone has been the go to since their quality is…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

2019 Ram 2500 Pin Weight Capacity and Fifth Wheel Recommendation

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching