Picking Out Rear Replacement Latch for TruXedo TruXport Tonneau

Question

Question:

Trying to determine the year my cover was made, cant find a date imprinted on it anywhere. Do have the serial number which is 014096405. trying to determine if it was made before or after 2011 in order to figure out if I can replace the rear latches.

asked by: Jim

0

Expert Reply:

Thanks for the picture of the rear latch you have! From that I can tell that the # TX1117755 that you referenced is the correct kit.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hey Dale, yes the Truxedo tonneau cover part #TX584901 does fit your 2025 Ram 1500 5-1/2 foot bed that has the Ram Box and the multi function tailgate. The only versions of the truck it doesn't fit are the ones with the power tailgate.

view full answer...

Answer 2

Thanks for the photos; there is not a special tool and if you have the TruXedo TruXport Soft, Roll-Up Tonneau Cover such as #TX246601 that fits a 2002 Dodge Ram 1500 the linked instruction manual even states "There is no need to adjust cover…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Picking Out Rear Replacement Latch for TruXedo TruXport Tonneau

Product Page this Question was Asked From

Continue Researching