Correct Replacement for Concertone ZX25

Question

Question:

Will this unit replace my old Concertone zx25?

asked by: Nancy W

0

Expert Reply:

Yes, the iRV RV Stereo part # iRV64FR is a direct plug and play replacement for the Concertone ZX25 therefore no wiring will be needed. That said, you may need to slightly enlarge the opening but this varies by case and wouldn't be more than a 1/4" to 1/2" or so if even needed.

expert reply by: Conner L

0

Answer 1

Since we don't currently offer any RV stereos that would be shallow enough to fit the minimal space you currently have the only option would be to move the stereo entirely to a new location and covering the cutout hole. You might be able to just…

view full answer...

Answer 2

As technology advances the size of RV stereos has drastically decreased so you will need to make alterations to get any other stereo to fit. I do however recommend swapping out your Concertone ZX700 with the Jensen RV Stereo #JWM60A since it is one…

view full answer...

Answer 3

Hey Gary, it sounds like you have an older double din Concertone RV stereo in your Forest River. The good news is the double din replacement stereos like the Jensen part #JWM60A are going to fit the same size cut out and will work great. We don't…

view full answer...

Answer 4

I found the installation instructions for your ZX25 and the mounting dimensions are 7.59 tall x 6.69 wide so the IRV RV Stereo part #IRV34 is the best replacement compared to the others as far as fit goes. It measures 7-3/4" wide x 7-1/2"…

view full answer...

Answer 5

The most similar option we have to replace your Concertone ZX25 radio, is the Jensen RV Stereo #JWM60A. This radio has a 3-zone output that allows for up to 6 speakers to be connected to the radio, and has mounting dimensions of 9" long, 6"…

view full answer...

Answer 6

The stereo in my video was the Jensen JWM30 or #JEN25RR if you look it up by our product numbers. It's a great option if you're just wanting to listen to music and don't need a DVD player. It has an HDMI input on both the front and back…

view full answer...

Answer 7

It looks like the iRV34 had a bit larger cutout for the mounting hole than the iRV64FR uses, but I do know that iRV uses the same adapter plug in for the back of their stereos and both are 3 zone units- so it will be a good replacement in regards to…

view full answer...

Answer 8

The iRV RV Stereo #IRV64FR would easily fit in place of the RV stereo you have installed in your 2020 Winnebago Micro Winnie as it was designed for fitting in place of standard RV stereos. This does not have an SD card input but in general you…

view full answer...

Answer 9

The iRV RV Stereo #292-101079 that you referenced is a really nice unit that will work well to replace your iRV33 model as long as its 9 inch long, 5 inch tall, and 5 inch deep mounting dimensions line up to your cutout. I reached out to my contact…

view full answer...

Answer 10

The Jensen #JWM60A does not have HDMI ports so you would have to make your connections using the RCA ports in the back of the unit if you went with this stereo. The iRV #IRV64FR has an HDMI port on the front as well as RCA ports on the back to make…

view full answer...

Answer 11

You are correct the Jensen part #JWM60A does not have a HDMI out/in port. However the JWM60A does have an USB port to plug in your phone or other accessories. If you still need HDMI, I recommend the Jensen Rv Stereo part #XRV10R that features a HDMI…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Correct Replacement for Concertone ZX25

Continue Researching