1-1/4" Hitch Recommendation For 2020 Toyota Corolla Hatchback

Question

Question:

I have a 2020 Toyota corolla hatchback and a bike rack with 1-1/4" shank. is there a hitch available? I really want a hidden one

asked by: Ryan

0

Expert Reply:

There is a hitch available for the 2020 Toyota Corolla Hatchback with Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit part # DR94FR which is a concealed cross tube design. The only portion of the hitch that is visible once installed is the 1-1/4" receiver tube. I have attached the installation instructions for your reference. I have also attached a photo.

expert reply by: Heather A

0

click to enlarge

Answer 1

Hey Fred, For a 2023 Toyota Corolla Hatchback you'd be able to install the Curt Trailer Hitch Receiver #C11567 that you were already looking at. From there you would want to measure the distance from the bottom of the trailer coupler to the top…

view full answer...

Answer 2

We do carry a hitch for a 2021 Toyota Corolla Hatchback! It's the Curt Class I, part #C11567. This hitch has a 1-1/4" receiver with a tongue weight capacity of 200 pounds and 2000 pounds of towing capacity. I've linked to a video…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Ashlynn, this is a really great question but what I was able to find is that the Yakima RidgeBack 2 Bike Rack #Y02457 CAN be used with the Curt Class I hitch part #C11567 and here's why. Yakima states this normally should be used on Class II…

view full answer...

Answer 5

According to the installation instructions you only need to flatten the two tabs on the end of the bumper beam (see pictures) to install the Curt Trailer Hitch Receiver #C11567 on your 2019 Toyota Corolla Hatchback. No fascia trimming or other…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2022 Toyota C-HR, I recommend the Curt item #C11567. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt Hitch item #C11567 is a class I hitch with a 1-1/4" receiver. It is the…

view full answer...

Answer 7

I checked with Curt and the part #C11567 fits the 2024 Toyota Corolla hatchbacks including the hybrids and then if you had a sedan you'd want the part #C34UR which also fits hybrids. These are same fits as the 2023 models.

view full answer...

Answer 8

Hello Eric. Congrats on the new 2025 Corolla Hatchback! Yes, the only hitch that I see for the 2025 Toyota Corolla Hatchback is the Curt Trailer Hitch Receiver #C11567 which is a Class I with a 1 1/4" receiver. I checked the previous years and…

view full answer...

Answer 9

Yakima rates their RidgeBack 2 bike rack #Y02457 as being a fit for Class II 1-1/4 inch receivers only. Given the capacities you mentioned, it sounds as if the hitch is a Class I. Check the rating sticker on the hitch, which should state if the hitch…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

1-1/4" Hitch Recommendation For 2020 Toyota Corolla Hatchback

Continue Researching