Could Two Dual Type 1 Propane Fittings be Attached Together for a Hose Extension

Question

Question:

Can this hose thread together on both ends to roll up like a garden hose? This will give me the answer if it will work for what I need.

asked by: Shawn D

0

Expert Reply:

The male and female fittings on the Camco propane extension hose part # 100914-120-MBS are a mirror image of each other (one side male other female) so you could easily connect two of these together if you wanted to.

expert reply by: Jameson C

0

Answer 1

Hey Tom, thanks for reaching out. We do offer that same hose as a 20 footer part #1000914-240-MBS but sadly we do not offer anything 25' long. The 20 footer is the longest we offer I'm afraid.

view full answer...

Answer 2

It sounds like what you are needing is an extension hose that features a Type 1 male fitting at one end and a Type 1 female fitting at the other end. For this we have the MB Sturgis Dual Type 1 Extension #100914-120-MBS for a 120 inch length hose or…

view full answer...

Answer 3

Yes, the MB Sturgis Dual Type 1 Tank Valve Extension Hose, #100914-120-MBS will fit leak free as long you are attaching to a component without damaged threads.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 7

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

Hey Adam, we have just what you are looking for with the B and W fifth wheel rail kit part #BWRVK2402 which is a confirmed fit for your 2017 Ford F-250 and is the industry standard rail design which means it will fit the hitch you have. This is a…

view full answer...

Answer 11

Hey, Dan. Thanks for your question! These two part numbers can definitely be a little confusing, but they’re essentially the same setup. The PullRite #PUL73RR is an all-in-one part number that includes everything you need. The PullRite #PUL25RR is…

view full answer...

Answer 12

Hey Tim, we do have other options as well that fit the 2.5 inch hitch size like with the Weigh Safe True Tow part #WS59MR which your tongue weight would work great with and comes with a shank that can do a drop of up to 6 inches. This also has a…

view full answer...

Could Two Dual Type 1 Propane Fittings be Attached Together for a Hose Extension

Product Page this Question was Asked From

Continue Researching