Will Sensors for Tire Pressure Monitoring System Affect Tire/Wheel Balance

Question

Question:

How does the TPMS affect tire balance? Do they need to be re balanced after installation.

asked by: David B

0

Expert Reply:

According to my contact at TireMinders, the sensors used on the # TPMS-APP-4 TPMS system are light enough that they would have no discernible effect on the wheel's balance.

I've linked to a product description video for the # TPMS-APP-4 system you'd looked at.

expert reply by: Mike L

0

Answer 1

What size tire do you have? There should be a 4 digit number on the tire after DOT. When reading the DOT number on your existing tire, you will want to look at the last four digits of the number (if there are more than 4), not necessarily the numbers…

view full answer...

Answer 2

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 3

The only solution I have is for a complete replacement system. Unfortunately, the Atwood Leveleg system was discontinued so there is not a replacement jack available. For a replacement, I recommend the Lippert Ground Control 3.0 Electric 5th Wheel RV…

view full answer...

Answer 4

The MTI number on your 8-201 hubs is simply a casting number. It does not indicate any information about the hubs or have anything to do with the actual part number. I'm not surprised to hear you have different outer bearings between the two…

view full answer...

Answer 5

Hello Mike, thanks for reaching out. Yes, you can use the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with a MORryde Cushioned 5th Wheel Pin Box such as part #MR24VR.

view full answer...

Answer 6

Great questions! I will answer your questions and then give a recommendation on what to do. a - The valve stem is more or less what determines the max psi rating for a wheel. So yes, there are wheels that can handle 110 psi as long as they have a…

view full answer...

Answer 7

I haven't heard that before so that's interesting. In the last few years, the wheel manufacturer's started removing pressure ratings on the wheels and have focused more on stating their capacity. Unless otherwise stamped on the wheel…

view full answer...

Answer 8

It's rather common for a camping trailer to lean to one side, it's likely the side with all your appliances and water tanks if I had to guess. In order to fix this I recommend some jounce bumpers like the SumoSprings Trailer Helper Springs,…

view full answer...

Answer 9

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 10

I spoke with one of the engineers at HWT and he told me that the psi rating for an HWT wheel and tire assembly is only limited by the valve stem and tire. If your current wheels or new wheels have a psi rating under 110 psi, it is okay to use tires…

view full answer...

Answer 11

Since wheels will be able to withstand the psi rating of any of the tires that are meant to fit it you will need to look at the valve stem as that is the deciding factor. If your valve stem has the rubber all the way up to the threads, like part…

view full answer...

Answer 12

For a general-purpose safety chain for a standard gooseneck trailer we offer #337BSC3842 from Buyers Products. This is a 42-inch chain with 3/8-inch clevis. The chain is rated for 15,000 pounds. This is sold as a single chain, not a pair. The 36-inch…

view full answer...

Will Sensors for Tire Pressure Monitoring System Affect Tire/Wheel Balance

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching