7,000 lb Hub and Rotor With Oil Bath
Updated 11/25/2019 | Published 11/24/2019
Products Featured in This Question
Question:
I have disc brakes on my 5th wheel, I don't see a kit to change to oil. Can the hub be machined to fit the thread on caps?
asked by: Jim P
Expert Reply:
The Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath # 8-219-9UC3-A should not be machined in order to be used as a hub and rotor, but there is an oil bath hub and rotor with the same bearings and seal as this drum assembly.
The Dexter 12-1/4" Hub-and-Rotor Assembly - Oil - 8 on 6-1/2 - E-Coat - 9/16" Bolts - 7K # 008-416-93 uses inner bearing # 25580, outer bearing # 14125A, and Oil Seal # 10-63, which are the same as the drum assembly it sounds like you need.
I have added a link to a video review of this hub and rotor for you to check out.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Breaking Down the DeeMaxx Trailer Wheel Lug Nut
- Q&A: What Is The Correct Oil To Use In My Dexter Axles With Oil Lube Bath Hubs?
- Search Results: valcrum oil cap
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: 023~465~00
- Search Results: 1/2 20 lug nuts
- Search Results: lugnut
- Q&A: What Spindles Should be Used on Dexter 7k Trailer Axle
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Shop: Americana Trailer Wheel Lug Nut - 7/8" Diameter - Stainless Steel - 1/2" - 20
- Shop: DeeMaxx Trailer Wheel Lug Nut - Stainless Steel - 9/16" - Qty 1
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Shop: Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Dacromet - 9/16" Bolts - 7,000 lbs
- Shop: DeeMaxx Trailer Idler Hub for 8,000-lb Axles - Oil - 8 on 6-1/2 - 9/16" Bolts - Galvanized
- Search Results: 7k hub
- Search Results: 9/16 wheel stud
- Q&A: Is There Kit to Convert 7k Axle from Grease to Oil Bath
- Q&A: Converting Standard 7K Grease Hubs to Oil Bath Hubs
- Q&A: Hub Bath Idler Hub Replacement for 7K Axle
- Q&A: Recommended Conversion Kit for Disc Brakes On 7,000 Lb Dexter Axles
- Search Results: trailer hubs and drums
- Q&A: Removal and Installation of a Unitized Oil Seal for a Trailer Oil Bath Hub
- Video: Review of the Unitized Oil Seal for Trailer Hubs
- Video: In-Depth Review of the Unitized Oil Seal for Trailer Hubs
- Video: Valcrum Universal Oil Cap Wrench for 2-1/4" and 2-1/2" Hex Caps Spec Review
- Video: Feature Review Kodiak Synthetic Bearing Oil for Oil Bath Hubs
- Video: A Closer Look at the 6-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles