Wiring Instructions for Pop & Lock Custom Tailgate Lock PAL8450 on 2016 Nissan Frontier

Question

Question:

looking for wiring instruction so I understand how and where to connect to existing power locks

asked by: Steve R

0

Expert Reply:

I have attached an image of the full installation instructions for the Pop & Lock Custom Tailgate Lock # PAL8450 below that you can review. Step 3 in particular details the wiring procedure for your truck. Please just let me know if you have any further questions!

expert reply by: Chris R

0

click to enlarge

Answer 1

Hey Andy, the wires you'll need to use to install the Pop and Lock tailgate lock part #PAL8450 are in the driver side kick panel of your 2018 Nissan Frontier. I attached a picture I took from the install instructions that detail where you'll…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Reuben, thanks for reaching out. We don't have a video showing how to install the T-Strap Hinge #PLR3408-PS, but I can provide some general instructions for you. It's a pretty straightforward bolt-on hinge, but taking a few minutes to…

view full answer...

Answer 5

Hey Rudy, thanks for the information! The Firestone Ride-Rite Air Helper Springs item #F2558 is designed for the factory suspension on a 2019 Nissan Frontier SV. The brackets will work with up to a 1" suspension lift without the need for…

view full answer...

Answer 6

Hey Jimbo! The Rhino-Rack Aero Bar Roof Rack for Camper Shells item #Y02-480B comes with the tracks, towers, lock covers, feet, mounting hardware, and crossbars. This kit includes everything you'll need to install the roof rack on a camper shell.…

view full answer...

Answer 7

We checked with Dexter and P-21 just indicates where the axle was made. With the serial number we could track down more info on your axle. However, in the mean time you could pretty easily get the bearing numbers off of your current bearings and then…

view full answer...

Answer 8

I spoke with Pop & Lock and their tech said that this definitely sounds like you're spliced into the wrong wires and that the Pop & Lock Custom Tailgate Lock #PAL8600 is receiving constant power once the vehicle is on, which is why the…

view full answer...

Answer 9

The Seal #10-9 has proven to work as a replacement for your oil seal 15191VB. The outer diameter of this seal is only slightly larger at 1.987 versus 1.983 on your seal but I find if you place your seals in the freezer the metal will shrink slightly…

view full answer...

Answer 10

Hi John! The etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel #e99007 could be used with weight distribution, but I don't think it's the one I would go for. It works really well for things like bike racks, cargo…

view full answer...

Answer 11

I can sympathize as rattling can be just a nightmare when all you want to do is get from Point A to Point B in relative peace. I highly recommend going with an anti-rattle for your 2 inch hitch to help stop the racket, and the best option is from…

view full answer...

Answer 12

All of our channel mount trailer couplers fit a 2-7/8" or 3" channel so if you wanted to get one from us you'll need to cut off your old channel and weld on a new one like what we see with the Demco Channel and Coupler Kit #DM6125-81.…

view full answer...

Wiring Instructions for Pop & Lock Custom Tailgate Lock PAL8450 on 2016 Nissan Frontier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching