Recommended Timbren Jounce Springs 2020 Chevy Silverado 2500

Question

Question:

Which Timbren springs do I need for my 2020 Chevy Silverado 2500?

asked by: Wilbur

0

Expert Reply:

To help suspend payload carried in the truck's bed, I'd recommend using # TGMRCK25D, which are rated up to 8600 lbs. Keep in mind, these will NOT increase the manufacturer's stated suspension capacity. For a slide-in camper or salt spreader, using # TGMRTT35D is recommended.

expert reply by: Mike L

0

Answer 1

Once installed, the double convoluted springs from the Timbren SES Kit, #TGMRCK25D, will sit 5-3/16 inches below the jounce bumper holder on the frame. The outer diameter of these springs is 4-5/16 inches. The single convoluted springs from the…

view full answer...

Answer 2

We have found that the Timbren setups affect the unloaded ride quality of a vehicle more than the other suspension enhancement solutions. For a similar solution that we have found to be a bit less harsh the Firestone Work-Rite kit part #F8632 would…

view full answer...

Answer 3

Hey Tim! If GMC says your truck can only handle 2,750 lbs that is the limit. There is nothing that can be done to increase this. Suspension enhancement like the #TGMRTT35D is designed to add additional support but will not increase the carrying…

view full answer...

Answer 4

Hi Mary, Do you leave the camper in the bed most of the time or does this truck spend a good chunk of time driving around without the camper? The SumoSprings Solo Custom Helper Springs #SSR-211-54 would be a great option if you leave the camper in…

view full answer...

Answer 5

No, the Hellwig Adjustable Big Wig Rear Anti-Sway Bar - 1-5/16" Diameter #HE96XR is designed for a stock ride height so you'll need part #HE86XR instead to accommodate the 4" lift on your 2023 Chevy Silverado 2500.

view full answer...

Answer 6

Hello Eric, You are in luck because we do have airbags that are going to work on your 2025 GMC Sierra 3500 AT4, they are the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle #F2613. I know that you asked it on the Air Lift bags,…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Recommended Timbren Jounce Springs 2020 Chevy Silverado 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching