Hidden Trailer Hitch Recommendation for 2020 Toyota Sienna

Question

Question:

What hidden trailer hitch would you recommend for my 2020 Toyota Sienna please?

asked by: Wendy H

0

Expert Reply:

The hidden trailer hitch I recommend for your 2020 Toyota Sienna is the Draw-Tite # 76112 because it is the only hitch of the three that is rated for use with a weight distribution system like the Fastway e2 # FA92-00-0600, which not only speaks to its overall strength but is important if you do plan on towing. I have added a photo showing this hitch installed on a Sienna so you can see exactly how hidden the crosstube is. I have also added a link to a video install of this hitch so you can see what the process entails.

If you do plan on towing, you'll also need a trailer wiring harness, and for your 2020 Sienna the correct harness is the T-One Vehicle Wiring Harness # 118648 if your Sienna is NOT an SE model or the T-One Vehicle Wiring Harness # 118498 if you DO have the SE model. I've added links to install videos of the harnesses for you to check out as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The trailer hitch receiver that I recommend installing on your 2011 Toyota Sienna XLE is the Draw-Tite Max-Frame Trailer Hitch Receiver #75237 as it is a confirmed fit and has the highest weight capacities of all of the available options for your…

view full answer...

Answer 2

If your 2013 Toyota Sienna already has a 4-pole wiring harness like #118498 then you can convert this to a 7-way by adding our kit #ETBC7. This kit includes all the parts needed to have a fully-functioning 7-way trailer socket. If you do not have a…

view full answer...

Answer 3

I can absolutely help with choosing a trailer hitch for your 2020 Toyota Sienna that will give you the best ground clearance. There are quite a few hitch options available for your vehicle, but the models that will sit highest off the ground when…

view full answer...

Answer 4

You can use the Trailer Coupler Lock for Surge Brake with 3-3/8" Span, part #e98888, to lock a actuator like #T43397007K once it's attached to the hitch ball through the latching mechanism on the top of your coupler. This product has a wide…

view full answer...

Answer 5

It's not a dumb question, no worries. Our install difficulty ratings are based on a scale of 1 through 10 with 1 being a very simple install that just about everyone could handle with no difficulty and 10 being very difficult, something probably…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Hidden Trailer Hitch Recommendation for 2020 Toyota Sienna

Featured Help Information

Miscellaneous Media

Continue Researching