Hand Rail For Lippert SolidStep Manual RV Steps

Question

Question:

Did you make a hand rail for the solid step? we have LC791574 can i leave it on during storage

asked by: Mike g

0

Expert Reply:

Yes, the Lippert Entry Assist Handrail for SolidStep Manual RV Steps part # LC799640 is the hand that you need for your SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791574. This hand rail fits third generation Triple or Quad SolidStep models. The Entry Assist Handrail can be easily
removed or left in place when storing if clearance allows inside the trailer.

expert reply by: Heather A

0

click to enlarge

Answer 1

The best Lippert SolidStep for you RV with a door frame that measures 28 inches and an entry height of 38 inches is the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames #LC791574, which, as you can see by the name of the…

view full answer...

Answer 2

The MORryde Pocket Kit handrail was designed just for the larger 3-step and 4-step variations. Since you have the 2-step style we'll have to go with more of a traditional approach, and for that I recommend the MORryde Safe-T-Rail Telescoping RV…

view full answer...

Answer 3

If you are measuring at the lip that the screen door rests on, you are likely shorting yourself a little bit. You want to measure from the inside of the door flange to inside of the door flange. I have included a couple pictures that show the…

view full answer...

Answer 4

Hey Steven, thanks for all of the info you listed on your Grand Design 310GK! Based on that the correct Lippert SolidStep RV Steps are the #LC791574 that you referenced. This matches your doorway width and is a 4 step like you have as well. Is your…

view full answer...

Answer 5

From what I can find the Norcold N306.3 fridge has a 2.7 cu ft capacity and is 20-1/8" wide and 26" tall. The most similar option we can offer is the 3.2 cu ft Everchill RV Mini Refrigerator #324-000111. The #324-000111 measures…

view full answer...

Answer 6

Unfortunately, I cannot tell you what wiper seal you would need for your 2004 Keystone Outback. This is not something that is known just from the RV information. It depends on your particular slide-out. The best way to determine what wiper seal you…

view full answer...

Answer 7

Yes, the MORryde StepAbove RV Steps with Strut Assist like #MR85RR can use the removable mounting plate. It isn't compatible with the struts but you already plan to remove them so that won't be an issue. Assuming you have a 26-28" wide…

view full answer...

Answer 8

Hey Joe, so when the Lippert Solidstep part #LC65DX is folded up in the stored position it will take up 10 inches of space inside the doorway of your RV. Do you have any cabinets near the doorway?

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Hand Rail For Lippert SolidStep Manual RV Steps

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching