Replacement Slipper Spring for 24-1/4 From Center Eye to Front of Rear Hanger
Updated 10/07/2019 | Published 10/04/2019
Question:
I am trying to replace a hook down slipper spring with 25 3/4 from front center to front side of hook. which unit would work?
asked by: Ethan M
Expert Reply:
Thank you for the pictures and the explanation!
The leaf spring that fits the spacing you have is the 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles # e67SR.
If you check out the attached photo the "B" dimension is 24-1/4" which is measured from the center of the bolt hole eye to the front of the rear hanger. Since it looks like your rear hanger is about 1-1/2" long this puts you about at the 24-1/4" mark and means this slipper spring will fit!
Product Page this Question was Asked From
5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 2 Inch Wide
- 5 Leaf
- 27 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles - 27" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Q&A: How Are Slipper Springs Attached to Equalizer and Hangers
- Search Results: slipper springs trailer leaf springs
- Search Results: 803t3
- Search Results: slipper spring kit
- Search Results: slipper spring equalizer
- Search Results: trailer axle
- Search Results: 1403t3
- Search Results: slipper spring hanger kit
- Shop: 5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Shop: 5-Leaf Slipper Spring w/ Radius End for 10,000-lb Trailer Axles - 30-1/2" Long
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Q&A: Troubleshooting End of Slipper Spring Popping Out on 2023 Outlaw Gooseneck Flatbed Trailer
- Q&A: Dimensions of Tandem-Axle Trailer Equalizer
- Q&A: Torque Specs for the Dexter Tandem Axle Trailer Equalizer Kit
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Q&A: Replacement Slipper Spring Leaf Springs with 2 Inch Width and 27 Inch Length
- Shop: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Q&A: How to Determine Correct Replacement Slipper Springs
- Q&A: Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter
- Shop: Brake Controller
- Shop: Trailer Hitch
- Video: Breaking Down the Kodiak 12" Hub-and-Rotor Assembly
- Video: Let’s Check Out the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles
- Article: Slipper Spring Trailer Suspension System Review
- Video: 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles Review
- Article: How Much Does a Boat and Trailer Weigh?
- Video: Comprehensive Review: Spring-Eye Bolt with Locknut for Slipper Springs