Looking For 1/2" x 20 Wheel Studs With .500" Knurl Diameter
Updated 02/17/2026 | Published 06/10/2024
Products Featured in This Question
Question:
I am looking for some 1/2 x 20 lug studs. the knurled part is .500 diameter. just a bit under 2 long and have a 1/4 thick round top that is about .750 in diameter with a side cut off so it is not completely round. I could take the side off myself if everything else was to spec. Thanks, Pat
asked by: Pat I
Expert Reply:
Hello Pat, thanks for reaching out. All of the 1/2" x 20 wheel studs we offer have a .545" knurl diameter. If you can make that work, I recommend the DeeMaxx Drive-In Wheel Stud # DE52GR which is 2" long overall, or the # DE45GR which is 1-11/16" long. These have rounded heads so you will have to cut a piece off.
Product Page this Question was Asked From
Replacement Mounting Stud for Dexter 5 on 4-1/2 Hub and Drum for Hydraulic Brakes
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- Hardware
- Studs
- Dexter
more information >
Continue Researching
- Search Results: trailer leaf springs
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 2" Long
- Search Results: wheel stud
- Search Results: 1/2 20 lug nuts
- Search Results: gs 1719dl
- Search Results: lippert trailer suspension parts
- Search Results: trailer leaf spring shackles
- Search Results: 1/2~20 lug nuts
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Shop: DeeMaxx Drive-In Wheel Stud - 1/2" Diameter x 1-11/16" Long
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Replacement Mounting Stud for Dexter 5 on 4-1/2 Hub and Drum for Hydraulic Brakes
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long
- Q&A: Replacement 1/2" - 20 Wheel Stud Options
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Video: Review of DeeMaxx 2 Inch Wheel Bolt For 13 Inch Integral Hub And Rotor Brake Assembly - DE52GR
- Q&A: Replacement Wheel and Tire For 2000 Load Rite Boat Trailer 4.80/4.00-8 With 5 on 4-1/2" Bolt Pattern
- Video: Review of the Grease Seal SL150
- Article: How to Raise Your Travel Trailer Height
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: U-Bolt Torque Recommendation for 1/2 inch Diameter On Trailer Suspension
- Video: Detailed Breakdown of the Replacement U-Bolt w/Nuts for 8,000-lb, Round Trailer Axles
- Video: Detailed Breakdown of the DeeMaxx Trailer Idler Hub for 3,500-lb Axles
- Q&A: Replacement 1/2" Thread Wheel Studs For A Trailer
- Video: What to Know About the DeeMaxx Drive-In Wheel Stud
- Q&A: Looking For Replacement Wheel Studs For 1980s Highlander Catamaran Trailer
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Jesse M.
2/17/2026
Hey Pat, did one of those DeeMaxx wheel studs end up matching your specs after you trimmed the head? Knowing which one worked could help others trying to match that same 1/2 x 20 size.