Can Ultra-Fab Solar-Powered Plumbing Vent Be Hooked Up to 12V Battery

Question

Question:

Can it also be assisted by 12 V battery

asked by: Bob

0

Expert Reply:

The Ultra-Fab Solar-Powered Plumbing Vent # UF53-945001 is operated solely from solar power and there isn't a good way to wire it to a 12V battery for assistance. This is a completely self-contained unit that will work really well during daylight hours but isn't able to operate overnight.

I have attached a short video review that you can check out as well.

expert reply by: Chris R

0

Answer 1

While there is not a specifically designed anti-theft device for the B&W Companion hitches like item #BWRVK3600, we do have a couple of options to secure it. The first is the Master Lock 1-9/16" Wide Solid Brass Body Padlock with 2"…

view full answer...

Answer 2

When installing the pivot arms on your B&W Companion OEM 5th Wheel Hitch for Ram Towing Prep Package - Dual Jaw - 25,000lbs Item #BWRVK3600 you'll want to ensure that you have 6" of clearance between the bed rails and the nose of your…

view full answer...

Answer 3

I contacted Ultra-Fab about the Solar Powered Plumbing Vent #UF53-945001 and they couldn't provide an exact CFM. They were able to tell me that it is very low. The blades move quite slow to the point where it doesn't even feel air moving. It…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 9

Hi Frank; the #RP74FR (68204) and #SWW-06 look different because they are a little different. The #RP74FR is only designed to work with the 68220 and 69220. If you have a different Sidewinder this wedge will not fit. It also fits a wider range of 5th…

view full answer...

Answer 10

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 11

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 12

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Can Ultra-Fab Solar-Powered Plumbing Vent Be Hooked Up to 12V Battery

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching