Troubleshooting Furrion Side Camera Kit Not Wanting to Pair to Monitor

Updated 09/23/2019 | Published 09/21/2019

Question:

FCE48TASL Furrion side cameras on GeoPro 2020. Boyfriend and I already have back camera on and “ was “ working great - pre wired for installation. Installed one camera from the above separate purchase from other info here according to wire colors and got that camera to work great. White to black for ground and black to green for running lights/camera connection. Back camera still worked. Installed other camera according to same color coding for wires and does not link up. Now links show on monitor screen with back camera as a side camera and one side camera as a side camera but the other side camera will not link up and cannot get the rear camera to link back to the rear camera spot!!! The last camera to install is the one on the passenger side behind the vehicle. Not even sure which one the camera thinks this is? Any suggestions?

asked by: Nora E

Expert Reply:

Normally the Furrion cameras are great at pairing easily to the monitor of the setup but sometimes you have to manually pair the camera to the monitor which is why there is a pairing button on the cameras. I attached a picture that shows where you'll find the pairing button as well.

expert reply by: Jameson C