Fit of Dexter E-Z Flex Heavy Duty Equalizer on Coleman 202RD Travel Trailer
Updated 09/18/2019 | Published 09/17/2019 >
Question:
I have a Coleman Lantern 202RD. It is a late 2017. I have been looking to improve the suspension since I take a lot of back roads. I have been communicating with MORryde about the CRE3000. There are a lot of measurements to take and some of mine seem right on the edge of the minimums. I would like to replace the shackles and the equalizer but dont want to buy something overly complicated or questionable fit. So now I am looking at E-Z Flex Heavy Duty Rubber Suspension System by Dexter Axle - 5-5/8 Equalizers Item # K71-652-00 Is there any way you can tell me if this should fit my Coleman 202RD travel trailer? Or make a recommendation. Thanks
asked by: Patrick L
Helpful Expert Reply:
The easiest way to determine if this will fit on your Colemen Travel Trailer is to measure your existing equalizer. The Dexter Axle # K71-652-00 EZ Flex is designed to replace their 13-104 equalizer. The two bottom holes should have an approximate 5-3/4 inch distance measured center hole to center hole between the holes where the shackle links mount and the hole where the equalizer mounts to the spring hangers as well as the holes where the shackles mount should be 9/16 of an inch in diameter. The height between the two lower holes an the upper hole should be 2 inches (see the provided diagram). The existing spacing of your axles should be approximately 33 inches, center to center.
I've linked you to a product description/install video that you might find helpful.
Product Page this Question was Asked From
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 5-5/8 Inch Long
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Installation of the Dexter E-Z Flex Suspension Kit - Enclosed Trailer
- Search Results: shocks
- Q&A: Availability of Dexter E-Z Flex Suspension System For Trailer with 34 Inch Axle Spacing
- Q&A: How to Determine Correct E-Z Flex Suspension Kit For Tandem Axle Trailer
- Q&A: Best Way to Lift Tandem Axle Trailer Suspension 2 inches
- Q&A: Equalizer Upgrade For 5-3/4 Inch Long Equalizers on Travel Trailer
- Q&A: How To Raise a Tandem Axle Trailer With Double Eye Leaf Springs Without an Axle Flip Kit
- Q&A: Dexter EZ Flex Kit that Fits in Place of 6 inch Long Equalizer
- Q&A: How To Fix Tires Hitting Fenders After Installing New Dexter E-Z Flex Equalizers
- Shop: Correct Track Trailer Alignment and Lift Kit - Tandem Axle
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
- Shop: Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
- Shop: Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Brake Controller
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
- Video: How To Choose Camper Leaf Springs



